Product Details
So, you wanna build a cinewhoop drone but don't have the time (or patience) to deep-dive into the endless abyss of forums, parts compatibility charts, and out-of-stock notifications? Oh, honey, we've been there. Welcome to the TheFPV Build It Kit —the ultimate 3.5-inch cinewhoop DIY project for those who'd rather spend their evenings flying (and probably crashing) than scouring the web for parts that might not even play nice together.
We've curated everything you need in one glorious box, from the frame to the motors to that sweet, sweet flight controller—just waiting for your hands-on craftsmanship. All that's left for you to do is slap it together, plug in your ELRS receiver (because we know you're cutting edge like that), and experience the ecstasy of FPV flight… until you clip a tree branch, of course.
What you get
This is our 3.5-inch cinewhoop, analogue + ELRS kit. The parts list is as follows:
- Frame : Bee35 Frame
- Flight Stack (Flight Controller + ESC) : Speedybee F405 Mini 35A Stack
- Motors : BetaFPV Lava 2006 Motors
- Propellers : HQ Prop 3.5Inch Cinewhoop props
- Receiver : Happymodel EP1 TCXO ELRS Reciever 2.4Ghz
- FPV Camera: RunCam Phoenix II Special Edition
- Video Transmitter : Speedybee TX800
- Video Antenna : AKK 5.8Ghz RHCP Antenna
You can also use this parts list a guide if you want to tweak this kit for your own liking, such as swapping the frame for another 3.5" cinewhoop frame that we sell.
Extra Parts
If you don't already have the rest, we recommend the following to get started:
- Battery : TheFPV 1100mAh 6S OR TheFPV 1200mAh 6S
- Charger : SkyRC e680 1-6S Charger (Single Channel) OR SkyRC D100 Neo 2-6S Charger (Dual Channel)
- Radio : Radiomaster Pocket (ELRS, NOT CC2500) OR Radiomaster Zorro (ELRS, NOT 4-in-1)
- Goggles : EV800D OR Emax Transporter II OR BetaFPV VR03
Suggested Tools
If you don't have any tools, this is what we suggest:
- UMT FPV Drone Tool Kit with Case (10pc) OR TheFPV 18pc Drone Tool Kit
- Sequre SQ-001 65W Portable Soldering Iron Kit OR UMT 80W Soldering Iron Kit with M900 Compatible Tips
- DroneBuildr Zip Tie / Cable Tie (Pack Of 20)
- DroneBuildr Wire Mesh Paracord Cable Sleeve (for your motor wires)
- Vifly ShortSaver 2 Smart Smoke Stopper
- DroneBuildr 100pcs 10cm Heat Shrink Tube Kit
Note: Accessory pack contents may vary based on supply availability.