Skip to product information
1 of 12

SEQURE

SEQURE E130 / E160 G2 4in1 ESC (4-12S)

SEQURE E130 / E160 G2 4in1 ESC (4-12S)

SKU:DTE130G212SA032

Regular price £95.99 GBP
Regular price Sale price £95.99 GBP
Sale Sold out
Taxes included. Shipping calculated at checkout.
Model
Quantity

In stock

UK delivery: typically 1–3 working days

Order by 3pm Monday–Friday for same-day dispatch. Eligible UK orders over £100 qualify for free shipping.

Some batteries and export-controlled products have shipping or destination restrictions. Checkout shows the options available for your order.

View full delivery information

View full details

Product Details

SEQURE E130 / E160 G2 4in1 ESC (4-12S)

Versions on this page: The E130 G2 and E160 G2 options listed here are the 12S AM32 versions. Some manufacturer photos show separate 8S versions that are not offered on this page.

Stop melting your gear trying to push 12S power through bargain-bin hardware. The SEQURE E130 / E160 G2 4in1 ESC is engineered for heavy-lift rigs and high-stress FPV drone racing where under-spec MOSFETs go to die. Driven by an STM32G071 MCU running AM32 or BLHeli_32 firmware, this board actively prevents desyncs while providing crisp throttle resolution and telemetry. Featuring a multi-layer PCB with ultra-thick copper and dual battery pads, it manages high current loads effortlessly so you can send it without sending a smoke signal.

Highlights

  • STM32G071 Processing: 32-bit MCU running AM32 or BLHeli_32 for high-speed signal response and custom timing.
  • High-Current Output: Handles up to 12S LiHV input with 160A continuous and 280A peak current on the E160 G2.
  • Desync-Free Design: Superior circuit switching eliminates timing desyncs across full DShot protocols.
  • Thermal Efficiency: On-board copper bars and low-resistance MOSFETs maximize heat dissipation under load.
  • Dual Battery Pads: Parallel pad design simplifies heavy-gauge wire soldering and increases current capacity.

Why You Want It

Most ESCs claim high amperage right up until you punch the throttle and watch your £1,000 quad fall out of the sky. The SEQURE G2 series doesn't lie about its specs. With a built-in current sensor (galvanometer), 16V 2A BEC, and real-time telemetry, you get direct feedback on motor speeds, current draw, and thermals before expensive hardware fails. Standard 30.5x30.5mm mounting drops straight into standard frames without awkward adapter plates.

Specs

  • Processor: STM32G071 32-bit
  • Input Voltage: 4-12S (12S versions of E130 G2 and E160 G2 listed here)
  • Continuous Current: 130A (E130 G2) / 160A (E160 G2)
  • Peak Current: 220A (E130 G2) / 280A (E160 G2)
  • Firmware: AM32 / BLHeli_32
  • Supported Protocols: DShot (All), PWM, Oneshot, Multishot
  • BEC: 16V @ 2A
  • Telemetry & Current Sensor: Integrated
  • Mounting Pattern: 30.5 x 30.5mm, M3
  • Dimensions & Weight (E130 G2): 54 x 57 x 7mm, 43g
  • Dimensions & Weight (E160 G2): 54 x 57 x 10mm, 66g

FAQ

What firmware comes supported on the SEQURE G2 ESC?

The ESC fully supports both AM32 and BLHeli_32 32-bit firmware for visual tuning, timing calibration, and telemetry output.

Can the SEQURE E160 G2 handle a 12S LiHV setup?

Yes, the E160 G2 model supports an input voltage range of 4-12S (14-53V) with 160A continuous current handling.

In the Box

  • 1x SEQURE E130 or E160 G2 4in1 ESC
  • 2x 63V 1200UF Electrolytic Capacitors
  • 1x XT90H-M Male Connector
  • 5x M3 x 10mm Shock Absorbing Washers
  • 1x 30AWG 40mm SH1.0-8P Cable
  • 2x 8AWG 150mm Power Cables

#FPVDrone #DroneESC #AM32 #12SFPV #UnmannedTech