
Product Details
P1 Air Unit HD VTX – Lightweight 1080p ArtLynk Power
Please note, due to the technical nature of this product, any defect/fault issues will need to be resolved directly with BetaFPV. We will only be able to accept returns for this item before it has been used.

If you’re hunting for a lightweight HD FPV VTX, a 1080p FPV air unit, or a digital FPV system for whoops that doesn’t weigh as much as your ambitions, the P1 Air Unit HD VTX is your cue to stop scrolling. It runs on the ArtLynk protocol, pushes 1080p@60fps at ~60ms latency, and somehow still weighs barely more than a decent zip tie.
Why You Want It
This is HD FPV without the usual bulk, wallet trauma, or “why is this overheating?” anxiety. With a crisp live feed, wide 170° field of view, and over 5 km transmission range*, the P1 Air Unit gives you confidence to thread gaps instead of guessing them. It’s responsive enough for freestyle, stable enough for cruising, and light enough for whoops that still want to feel like whoops.
Existential shrug: will this make you fearless? No. But it will make your video clear enough that fear feels optional.





Specifications
|
Air Unit |
|
|
Weight |
Air Unit (Camera excluded): Approx. 3.61g
Air Unit (Camera included): Approx. 6.5g
Antenna: Approx. 0.44g
|
|
Mounting Hole Size |
25.5*25.5mm |
|
Mounting Hole Diameter |
ø2.5mm |
|
Dimensions (L*W*H) |
Air Unit: 30*30*5.5mm
Camera: 14*14*17mm
|
|
Ports |
SH 1.0 6-pin (FC)
SH 1.0 4-pin (USB) |
|
VTX |
|
|
Frequency |
5.1-5.9 GHz |
|
Effective lsotropic Radiated Power (EIRP) |
<200mW (FCC/SRRC)
<25mW (CE)
|
|
Video Transmission Range |
>5km
|
|
Video Transmission Latency |
Approx. 60ms |
|
Live View Quality |
1080p@60fps |
|
Bandwidth |
10MHz |
|
Antenna |
Single antenna |
|
Channels |
3 |
|
Camera |
|
|
Mounting Width |
14mm |
|
Mounting Hole |
M2 |
|
Image Sensor |
1/2.9'' CMOS |
|
Lens |
Field of View (FOV): 170° |
|
Video Format |
MP4 |
|
Max Video Transmission Bitrate |
20Mbps |
|
OSD |
Canvas mode |
|
Firmware |
|
|
Input Voltage |
5V |
|
Operating Temperature |
-10℃ to 40℃ |
|
Compatibility |
|
|
Supported FC |
Betaflight FC & BETAFPV FC |
ArtLynk Protocol – The Short Version
ArtLynk is a low-latency, long-range digital FPV ecosystem designed to stay stable when environments get messy. Powered by modern Artosyn chipsets, it delivers smooth HD video at around 60 ms latency — the sweet spot where control still feels instinctive instead of delayed.
Bonus: it’s an open, collaborative ecosystem. That means more goggles, more air units, and fewer dead-end investments.
Compatibility
Uses a standard SH1.0 6-pin connector and works seamlessly with Betaflight and BETAFPV flight controllers. Fully compatible with VR04 HD goggles and supported bind-and-fly ArtLynk models.
What’s in the Box*

- 1 * P1 Air Unit HD VTX
- 1 * 6Pin Cable
- 1 * Accessories Package (4*Shock-absorbing Balls, 2*M2-4 Screws, 4*M2-6 Screws)
- 1 * User Manual
File
Disclaimer
Range varies with environment and regulations, but the HD clarity and our enthusiasm for selling it to you remain impressively consistent.
Still Here?
You’re clearly planning an HD whoop or compact freestyle build and want low latency, real range, and minimal weight. The P1 Air Unit HD VTX ticks those boxes without dragging your AUW into bad decisions. Add it to your basket, bind it up, and enjoy finally trusting what you see.