Johnny 4-inch Carbon FPV Drone Frame

Looking for a deadest light 4-inch FPV drone frame to shred the local bandit park or squeeze ridiculous flight times? The Johnny 4-inch frame is an absolute unit. Weighing in at a malnourished 35.5g, this carbon fibre freestyle chassis is primed for micro long-range setups. Built with 3mm carbon arms and a 1.5mm main plate, the Johnny utilises a 20x20mm flight controller stack and standard 19mm micro camera mount. Strap a 4S or 6S battery on this bad boy and watch your RPM filters work overtime. Don't overpay for shiny packaging—buy a raw carbon frame and get flying.

Highlights

• Featherweight Design: At a laughable 35.5g, it barely tips the scales, leaving plenty of headroom for micro long-range battery setups.
• Survivable Carbon: 3mm bottom plate arms handle concrete bashes and gate-keeping trees, while the 1.5mm top plate keeps weight down.
• Standardised Mounting: Designed strictly for 20x20mm M2 stacks and 19mm micro FPV cameras for a hassle-free build.

Why You Want It

You want it because it’s cheap, it’s cheerful, and it gets the job done. Whether you are chasing micro long-range efficiency on a 4-inch prop or just need a brutal backyard basher that won’t break the bank, the Johnny frame delivers. It leaves budget room for the expensive VTXs you're inevitably going to annihilate.

Specs

• Wheelbase (Diagonal Motor Pitch): 180mm
• Arm Thickness (Shoulder): 3mm Carbon Fibre
• Plate Thickness: 1.5mm Carbon Fibre
• FC Mounting Pattern (Sticks): 20x20mm (M2)
• Camera Compatibility: Micro (19mm)
• Bare Frame Weight: 35.5g

FAQ

What size props does the Johnny frame use?

This is a 4-inch frame, designed specifically for 4-inch propellers with a 180mm diagonal wheelbase.

Can I use a standard 20x20 stack with this frame?

Yes, the Johnny frame is engineered for standard 20x20mm M2 flight controller stacks and micro FPV cameras.

In the Box

• 1x Johnny 4-inch Carbon Frame Kit
• 1x pack screws

#FPVFrame #MicroLongRange #4InchFPV #CarbonFibre