GEPRC TAKER H60_BLS 60A 4-in-1 ESC

Want tight wiring, compact layout, and serious headroom? The GEPRC TAKER H60_BLS 60A 4-in-1 ESC combines four ESC channels into one board—each supporting up to 60 A continuous—and fits neatly in 30.5 × 30.5 mm stack layouts. (Yes, it’s real.)

Why You Want It

Because fewer solder joints, neater wiring, and less mass saved are wins you can’t argue with. This 4-in-1 ESC cuts down clutter, reduces harness weight, and gives you more headroom per motor. It’s ideal for 5″ freestyle, mid-size racing, or any build where clean layout and durability matter.

Specifications

• Input voltage: 3S to 6S LiPo
• Continuous current per channel: 60 A
• Burst / headroom (short term): Slight margin above 60 A (varies by cooling / voltage)
• Protocols supported: DShot 150 / 300 / 600
• Board size: 30.5 × 30.5 mm (standard mounting footprint)
• Weight: ~ (unspecified, typical for 4-in-1 ESCs in this class)
• Mounting holes: Likely standard M3 spacing for stack integration
• Features: Common ground, integrated FETs, shared power plane for better efficiency

What’s in the Box*

• 1 x ESC
• 1 x Capacitor
• 1 x Flight Controller Adapter Cable
• 1 x XT60 Power cable
• 4 x Silicone anti-shake pads

Disclaimer

*Wire length, cooling, and included hardware may vary between batches. Always check pinouts, polarity, and perform a no-load test before flight.

Still Here?

You read the spec sheet—good. This ESC is for pilots who prefer clean builds and want to push hard without fried arms. Want pairing recommendations (motor / prop), thermal layout tips, or a UK/CE spec sheet to drop into your listing? Just say the word.