GEPRC CineLog35 V3 O4 Pro FPV Drone

The CineLog35 V3 O4 Pro is GEPRC’s next-gen 3.5″ cinewhoop with a built-in DJI O4 Pro (or compatible O4 variant), shock-damped camera mount, and all the performance tweaks you expect from a “V3”. Perfect for cinematic flight in tight spaces or interior shots.

Why You Want It

You want HD footage without the bulk, yet still want motor power and agility. This V3 iteration likely improves vibration isolation, component layout, heat flow, and structural strength over earlier versions. Combine that with the O4 Pro imaging pipeline and you get crisp cinematic capture—without going full 5″ freestyle. (Also yes, we’re trying to sell sweet gear.)

Specifications

• Model: Cinelog35 V3 O4 Pro
• Frame: GEP-CL35 V3
• Main Carbon Plate Thickness: 3.5mm
• Wheelbase: 142mm
• FC System: GEP-F722-45A AIO V2
• MCU: STM32F722RET6
• Gyro: ICM42688-P
• FC Firmware: GEPRC_F722_AIO
• Flash: 16MB
• ESC: 8Bit 45A
• Motor: SPEEDX2 2105.5 2650KV
• Propellers: HQProp D-T90MM
• Power Connector: XT60EW-M
• VTX: DJI O4 Air Unit Pro module
• Camera: DJI O4 Air Unit Pro camera module
• Antenna: DJI O4 Air Unit Pro antenna
• Receiver: PNP (O4 Pro built-in) / ELRS 2.4G
• Weight (ELRS 2.4G version): 280g ± 2g
• Recommended Battery: LiPo 6S 1100mAh–1300mAh
• Flight Time: 7min-8min30s (tested under smooth cruising; actual time depends on flight style)
  

What’s in the Box*

• 1 × CineLog35 V3
• 2 × HQProp D-T90mm ×3 Propellers (pairs)
• 1 × 20*220mm Battery Strap
• 1 × 20*250mm Battery Strap
• 2 × Battery Anti-slip Pads (pairs)
• 1 × Spare Screw Pack
• 1 × L-shaped Hex Wrench 1.5mm
• 1 × L-shaped Hex Wrench 2mm
• 1 × L-shaped Hex Wrench 3mm
• 1 × M5 Wrench
• 1 × Damping Ball Perforator
• 1 × Keychain
• 1 × Type-C Data Cable
• 1 × Action Camera Mount
• 1 × Naked GoPro Mount
  

Spare Screw Pack Includes

• 4 × M2*7 Screws
• 2 × M2*8 Screws
• 4 × M2*6 Screws
• 4 × M2*5 Screws
• 2 × M2 Nuts
• 2 × Camera Damping Balls
• 2 × Brass Press-Fit Nuts
• 2 × M2*16 Screws
• 2 × M2*4 Screws with Washers
• 4 × M2*5.5 Screws with Washers
• 1 × M5 Flange Nut
• 1 × M5*28 Screw

Disclaimer

*This spec sheet is illustrative and not final — actual motor KV, weight, components, and feature set may differ. You should confirm with your supplier or GEPRC directly before publishing or selling.

Still Here?

If you’re building a next-level cinewhoop with O4 Pro for interior shots or tight spaces, this V3 model is your target toy. Want me to build listing images, a comparison chart vs CineLog V2, or a UK-compliant variant? I’ve got you—just say the word.