Pavo20 Pro II with DJI O4 Pro - 4K Brushless Whoop

The Pavo20 Pro II with DJI O4 Pro has officially landed in the UK to end your struggle with blurry analog DVR and shaky builds. This isn’t just another brushless cinewhoop; it’s a pre-built powerhouse featuring the DJI O4 Pro Air Unit for crisp 4K/60fps footage that’ll make your local park look like the Swiss Alps. Whether you need the Pavo20 Pro II ELRS version for your Radiomaster or the SBUS version for your DJI FPV Remote Controller 3, we’ve got you covered. It’s light, it’s loud, and it’s legally sub-250g, so you can spend less time in CAA paperwork purgatory and more time dodging trees.

Why You Want It

You’re buying this because you’re tired of the "build, fly, crash, solder, cry" cycle. We’ve done the hard work by integrating the DJI O4 Pro into a frame that doesn't flex like a wet noodle. You get professional-grade 4K aerials in a package that fits in your palm. It’s the ultimate "guilt-free" purchase—small enough to not be threatening, but powerful enough to make your neighbors think a very angry, glowing hornet has moved in. Plus, we actually stock these in the UK, so you won’t be waiting for a slow boat from China while the British summer (all three days of it) passes you by.

The DJI O4 Pro Air Unit: 4K Mastery

This version comes fully loaded with the DJI O4 Pro Air Unit. We’re talking 4K/60fps stabilized footage and a 1080p high-frame-rate low-latency feed that’ll make you feel like you’ve actually got 20/20 vision for once. The integrated Pro Bracket keeps the lens safe and the vibrations non-existent. If your footage still looks bad, it’s officially a skill issue, not a gear issue.

Radio Control: ELRS or DJI SBUS?

Choose your fighter. The Serial ELRS version is for the "I own six different radios" crowd who demand maximum range and packet rates. The SBUS version is specifically tuned for the DJI FPV Remote Controller 3, offering a clean, one-controller setup that works natively with your O4 Pro system. It’s plug-and-play simplicity for people who have better things to do than bind receivers all afternoon.

Propulsion: The LAVA Flow

Under the hood, you’ve got LAVA 1104 7200KV motors spinning co-developed Gemfan 2218 3-blade props. With an 8-11% thrust boost over the previous generation, this 2.2-inch beast has enough punch to pull out of a dive before you meet the pavement. It’s aggressive, agile, and surprisingly efficient—delivering up to 6.5 minutes of "don't-tell-my-wife-how-much-this-cost" joy.

Specifications

• VTX/Camera: DJI O4 Pro Air Unit (Included and installed)
• Weight: 107.7g (AUW without battery - still well under 250g)
• Radio Options: Serial ELRS or DJI SBUS (Remote 3 compatible)
• FC: F4 2-3S 20A AIO V1 (Dual BEC for stable DJI power)
• LEDs: NightFire RGB Strip (10 modes, because we're fancy)
• Battery Connector: XT30 (Standard 3S LAVA 450-550mAh recommended)

The Ultimate UK Cinewhoop Experience

We’ve pre-optimized the PIDs and filtered the noise so you don't have to. The Pavo20 Pro II is ready to rip straight out of the box. Just bind your radio, check your modes, and try to remember that "Turtle Mode" won't save you if you end up in a pond.

What’s in the Box*

• 1× Pavo20 Pro II Quad (DJI O4 Pro Version)
• 1× NightFire RGB LED Strip (Pre-installed for maximum glow)
• 4× Gemfan 2218 3-Blade Props (Enough to break a few)
• 1× Hardware & Tool Kit (For when you inevitably tinker)

Disclaimer

The O4 Pro system is included here, unlike our PNP version where you have to provide your own "vision." Batteries not included—we can't give everything away.

Still Here?

You’ve read through the specs of the F4 20A AIO and the 7200KV motors, so you’re clearly committed. You know you want that 4K O4 Pro goodness without the hassle of a custom build. Stop lingering on this page and add it to your basket—our UK stock moves faster than this drone in a tailwind. Grab some 3S LAVA packs, skip the DIY frustration, and go show those DJI Avata pilots what a real brushless whoop can do. See you in the clouds (or the bushes, we don't judge).