How to Update ExpressLRS Firmware: Radio and Receiver Guide

How to Update ExpressLRS Firmware: Radio and Receiver Guide

How to update ExpressLRS firmware on your TX module and receiver using ELRS Configurator. Covers Wi-Fi flashing, Betaflight passthrough, and common update problems.

May 09, 2026 4 min read
FPV Drone Flight Modes Explained: Angle, Horizon, and Acro Mode

FPV Drone Flight Modes Explained: Angle, Horizon, and Acro Mode

How to choose between Angle, Horizon, and Acro flight modes in Betaflight. Covers setup, when to use each mode, and common mistakes we see from...

May 09, 2026 4 min read
How to Set Up RC Wing Servos for Fixed-Wing FPV

How to Set Up RC Wing Servos for Fixed-Wing FPV

How to choose and install the right wing servos for your fixed-wing FPV build. Covers digital vs analogue, torque matching, HV wiring, and linkage geometry.

May 09, 2026 4 min read
FPV Drone Buzzer Setup: How to Find a Lost Drone

FPV Drone Buzzer Setup: How to Find a Lost Drone

How to set up a buzzer on your FPV drone to find it after a crash. Covers passive buzzers, self-powered finders, Betaflight configuration, DSHOT beacon...

May 09, 2026 4 min read
Running Out of UART Ports: How We Wire GPS, VTX, and ELRS on the Same Flight Controller

Running Out of UART Ports: How We Wire GPS, VTX, and ELRS on the Same Flight Controller

Learn how to plan UART ports on your FPV flight controller. Covers ELRS receiver, GPS, VTX SmartAudio wiring priority, and what to do when you...

May 09, 2026 3 min read
Why We Always Solder the ESC First: FPV Build Order That Saves Time

Why We Always Solder the ESC First: FPV Build Order That Saves Time

The FPV drone build order that prevents lifted pads, cold joints and costly rework. We share the exact soldering sequence we use on every drone...

May 09, 2026 4 min read
After 200 Repairs, These Are the FPV Build Mistakes We See Every Week

After 200 Repairs, These Are the FPV Build Mistakes We See Every Week

The FPV build mistakes we encounter most in our workshop, from cold solder joints to reversed motor wires. Covers soldering technique, motor direction checks, wiring...

May 09, 2026 4 min read
Why Your VTX Keeps Overheating: The Setup Mistakes We See Every Week

Why Your VTX Keeps Overheating: The Setup Mistakes We See Every Week

How to set up your FPV VTX for reliable video. Covers SmartAudio wiring, Raceband channels, power levels, and the three overheating mistakes we see weekly.

May 09, 2026 4 min read
FPV Frame Stiffness: Why a Wobbly Frame Ruins Your PID Tune

FPV Frame Stiffness: Why a Wobbly Frame Ruins Your PID Tune

How frame flex ruins FPV PID tuning. Covers carbon thickness, arm deflection, true-X vs deadcat stiffness, and the signs your frame is the real tuning...

May 09, 2026 4 min read
We Pushed ELRS to 10km: What Actually Limits Your FPV Range

We Pushed ELRS to 10km: What Actually Limits Your FPV Range

How far can an FPV drone fly? Covers ELRS and Crossfire control link range, analog and digital video range, and what actually limits your signal...

May 06, 2026 6 min read
FPV Drone Prop Wash Explained: What Causes It and How to Tune It Out

FPV Drone Prop Wash Explained: What Causes It and How to Tune It Out

How to fix FPV drone prop wash wobble. Covers D-term tuning, dynamic notch filters, propeller selection, and frame stiffness. Practical tips from our workshop.

May 06, 2026 4 min read
FPV Drone Pre-Flight Checklist: What to Check Before Every Flight

FPV Drone Pre-Flight Checklist: What to Check Before Every Flight

A practical pre-flight checklist for FPV drone pilots covering battery voltage, prop inspection, radio and failsafe verification, and GPS lock before flying.

May 06, 2026 4 min read
« Previous 1 4 5 6 7 8 20 Next »