The GPS Logger Does Not Lie: How Fast FPV Drones Actually Go in the Real World

The GPS Logger Does Not Lie: How Fast FPV Drones Actually Go in the Real World

Real GPS-verified top speeds for FPV drones by build class. Covers whoops, 3.5-inch, 5-inch freestyle, and racing builds. What limits speed and how to measure...

Jun 19, 2026 4 min read
The Radio That Replaced Four on Our Bench: TX16S MK3 Setup Guide

The Radio That Replaced Four on Our Bench: TX16S MK3 Setup Guide

How to set up the RadioMaster TX16S MK3 for FPV. Covers ELRS vs M2 multi-protocol, EdgeTX configuration, Gemini dual-band, and the workshop setup we use...

Jun 19, 2026 4 min read
Late Disarms Break More Props Than Crashes: How to Land an FPV Drone

Late Disarms Break More Props Than Crashes: How to Land an FPV Drone

How to land an FPV drone without breaking props. The real cause of prop damage is late disarm, not hard landings. Covers the disarm-drop technique,...

Jun 16, 2026 4 min read
The Motor That Stopped at Full Throttle: FPV Motor Desync and How We Prevent It

The Motor That Stopped at Full Throttle: FPV Motor Desync and How We Prevent It

How to diagnose and fix FPV motor desync when a motor stops mid-flight. Covers ESC timing, voltage sag, firmware settings, and our workshop fix checklist.

Jun 16, 2026 4 min read
Construction Site Monitoring Using Drones with Emlid RTK

Construction Site Monitoring Using Drones with Emlid RTK

Learn how to set up weekly drone surveys for construction site monitoring using Emlid RTK. Covers progress tracking, orthomosaic comparison, stockpile volume calculations, and cut/fill...

Jun 15, 2026 13 min read
The 50-Flight Service: FPV Drone Maintenance We Do on Every Quad in Our Workshop

The 50-Flight Service: FPV Drone Maintenance We Do on Every Quad in Our Workshop

How to maintain your FPV drone with a 50-flight service interval. Covers motor inspection, propeller replacement, solder joint checks, frame hardware, and the bench kit...

Jun 15, 2026 4 min read
The Cold Joint That Fell Apart at 200 Metres: FPV Soldering Quality From Our Workshop

The Cold Joint That Fell Apart at 200 Metres: FPV Soldering Quality From Our Workshop

How to identify and fix cold solder joints on FPV drone builds. Covers joint inspection, soldering temperature, flux usage, and the joints that fail most....

Jun 15, 2026 4 min read
The Box-Fresh Quad That Wouldn't Arm: What Nobody Tells You About BNF FPV Setup

The Box-Fresh Quad That Wouldn't Arm: What Nobody Tells You About BNF FPV Setup

How to set up a BNF FPV drone from unboxing to first flight. Covers receiver binding, Betaflight verification, common arming issues, CAA registration, and first...

Jun 15, 2026 4 min read
How Long Do FPV Drones Last? What Our Workshop Repairs Reveal

How Long Do FPV Drones Last? What Our Workshop Repairs Reveal

How long FPV drones really last, based on what wears out in our workshop. Lifespans for motors, ESCs, batteries and props, plus what kills them...

Jun 14, 2026 4 min read
We Put 20 Builds on a Scale: What It Actually Takes to Stay Under 250g

We Put 20 Builds on a Scale: What It Actually Takes to Stay Under 250g

Build an FPV drone that stays under the UK CAA 250g line. Covers A1 Open category rules, a component weight budget, and the accessories that...

Jun 14, 2026 3 min read
Why We Won't Fly Without Cover: FPV Drone Insurance UK Explained

Why We Won't Fly Without Cover: FPV Drone Insurance UK Explained

When FPV drone insurance is legally required in the UK, what public liability covers, and how FPV UK vs BMFA memberships compare. Includes EC 785/2004...

Jun 13, 2026 3 min read
The Cinewhoop We Grab Before Our 5-Inch: BetaFPV Pavo20 Pro II

The Cinewhoop We Grab Before Our 5-Inch: BetaFPV Pavo20 Pro II

How to set up and fly the BetaFPV Pavo20 Pro II cinewhoop with DJI O4 Pro. Covers ELRS vs DJI receiver choice, battery selection, CAA...

Jun 12, 2026 4 min read
1 2 3 20 Next »