Why We Still Fly in 20mph Wind: FPV Lessons From 50 UK Weather Flights
How to fly an FPV drone in windy UK weather. Covers build sizes for wind, GPS Rescue setup, propeller choice, and flying techniques that keep...
The Build That Would Not Hover Straight: Why Your FPV Drone Drifts in Angle Mode
How to fix an FPV drone that drifts in Angle or Horizon mode. Covers accelerometer calibration, board alignment, FC mounting, prop condition, centre of gravity,...
The £12 Part That Saved £300 of Electronics: Why We Never Power On Without a Smoke Stopper
Why every FPV drone build needs a smoke stopper before first power-on. Covers how PTC fuses protect against solder bridges, reversed polarity, and short circuits....
The Noise Lines on Every First Build: FPV Power Filtering From Our Workshop
How to fix horizontal lines in your FPV video feed using a low-ESR capacitor. Covers capacitor selection, soldering placement, LC filters, and testing. Workshop-tested advice...
The Melted Wire That Nearly Caught a Workbench: FPV Power Lead Gauge Guide
How to choose the right wire gauge for FPV drone power leads. Covers AWG sizes, current ratings, silicone vs PVC insulation, and the mistakes that...
The 8-Inch Long Range Quad We Can't Stop Flying: Complete Build Guide
How to build an 8-inch long range FPV drone with the right motors, props, and battery for 20-35 minute flights. Includes our tested parts list...
The Battery That Fell Out at 100m: FPV Battery Mounting Done Right
How to mount your FPV battery with the right strap, pad, and routing. Covers Kevlar vs silicone straps, anti-skid pads, and CG positioning for secure...
The Walk That Made Us Set Up Turtle Mode on Every Build
How to set up turtle mode on your FPV drone. Covers DShot requirements, Betaflight switch config, when NOT to use it, and workshop tips from...
The Frame We Wish We'd Bought First: How to Choose the Right FPV Frame
How to choose the right FPV frame for your build. Covers sizes from whoop to 7-inch long-range, arm thickness, Deadcat vs True-X, with picks from...
The Melted XT30 That Killed a 5-Inch Build: Battery Connector Ratings Actually Matter
FPV battery connector guide: XT30, XT60, XT90, AS150 current ratings. Which connector your build needs and how to solder it. Based on workshop repairs.
The Bent Prop That Destroyed a Motor Bearing: Why Prop Balance Matters More Than You Think
How to balance FPV propellers and prevent motor bearing damage. Covers static balance with tape and sandpaper, when to replace props, and common mistakes.
Why Your FPV Drone Feels Sluggish: The Weight Mistakes We See in Every Build
How excess weight destroys FPV drone performance. Covers component weight budgets, wire trimming, and the build mistakes that add unnecessary grams.