The GPS Logger Does Not Lie: How Fast FPV Drones Actually Go in the Real World
Real GPS-verified top speeds for FPV drones by build class. Covers whoops, 3.5-inch, 5-inch freestyle, and racing builds. What limits speed and how to measure...
Real GPS-verified top speeds for FPV drones by build class. Covers whoops, 3.5-inch, 5-inch freestyle, and racing builds. What limits speed and how to measure...
How to maintain your FPV drone with a 50-flight service interval. Covers motor inspection, propeller replacement, solder joint checks, frame hardware, and the bench kit...
How to identify and fix cold solder joints on FPV drone builds. Covers joint inspection, soldering temperature, flux usage, and the joints that fail most....
Build an FPV drone that stays under the UK CAA 250g line. Covers A1 Open category rules, a component weight budget, and the accessories that...
How to calculate thrust-to-weight ratio for FPV drone builds. Covers the TWR formula, ideal ratios by flying style, and real workshop examples from our bench.
Why we recommend a 2.5-inch cinewhoop over a 5-inch build for first-time FPV pilots. Covers safety, cost, CAA rules, and our workshop learning progression.
Why every FPV drone build needs a smoke stopper before first power-on. Covers how PTC fuses protect against solder bridges, reversed polarity, and short circuits....
How to fix horizontal lines in your FPV video feed using a low-ESR capacitor. Covers capacitor selection, soldering placement, LC filters, and testing. Workshop-tested advice...
How to build an 8-inch long range FPV drone with the right motors, props, and battery for 20-35 minute flights. Includes our tested parts list...
How to mount your FPV battery with the right strap, pad, and routing. Covers Kevlar vs silicone straps, anti-skid pads, and CG positioning for secure...
How to choose the right FPV frame for your build. Covers sizes from whoop to 7-inch long-range, arm thickness, Deadcat vs True-X, with picks from...
How excess weight destroys FPV drone performance. Covers component weight budgets, wire trimming, and the build mistakes that add unnecessary grams.