25mm Clear Heatshrink Tubing (1m Length)

You spent four hours chasing a clean FPV build, only to consider wrapping exposed ESC wiring in black electrical tape like an absolute heathen. Don't do it. Our 25mm clear heatshrink gives your drone electronics genuine short-circuit protection while keeping LED indicators, solder joints, and receiver labels visible. Backed by Unmanned Tech's 10 years of commercial FPV manufacturing and delivery experience, this 1-metre cut of flame-retardant polyolefin ensures you insulate high-current connections properly before you release the magic smoke on first plug-in.

Key Highlights

• Visible Diagnostics: Transparent polyolefin material keeps status LEDs, heat damage, and wire colors fully readable after shrinking.
• Critical Component Insulation: 25mm diameter comfortably wraps larger ESC boards, VTX units, and thick power distribution wiring.
• Tough Protection: Flame retardant tubing provides corrosion resistance and electrical insulation against harsh crash impacts.

Why You Want It

Because troubleshooting a dead quad in the field shouldn't require peeling off sticky layers of electrical tape just to see if an LED is blinking. Slide this 25mm clear sleeve over your chunky components, hit it with a heat gun, and get clean, strain-relieved wiring that lets you inspect solder work instantly.

Specifications

• Diameter: 25mm
• Length: 1m (Pre-cut)
• Material: Clear polyolefin
• Shrink Ratio: expect standard shrinkage down to ~12.5mm
• Properties: Flame retardant, corrosion resistant, electrically insulating
• Weight: Data unavailable (our scale refused to register a meter of plastic, and the factory isn't telling)
• Wall Thickness & Adhesive Lining: Data unavailable

FAQ

Can I use a lighter instead of a heat gun to shrink this?

You can, but you will char the clear polyolefin black and ruin the entire point of buying transparent tubing. Use a proper heat gun on low heat for an even, clean finish.

What’s in the Box*

• 1× 25mm Clear Heatshrink Tube (1m length)

Disclaimer

Heatshrink prevents electrical shorts; it does not prevent poor solder joints, inverted polarity, or flying full-throttle into concrete posts. Ensure your heat gun doesn't melt adjacent plastics during installation.

Still Here?

Your bare electronics are one wayward carbon fibre splinter away from a fireworks show. Buy the metre of plastic and protect your build.