Skip to product information
1 of 28

RadioMaster

RadioMaster Bandit Micro ExpressLRS 915MHz Module

RadioMaster Bandit Micro ExpressLRS 915MHz Module

SKU:RMBMELRS915

Regular price £48.99 GBP
Regular price Sale price £48.99 GBP
Sale Sold out
Taxes included. Shipping calculated at checkout.
Quantity

In stock

🇬🇧

Compliance Requirement

This product is capable of operating at power levels or on frequencies that require a specific licence or exemption to operate legally in the UK. As such, it is legally classified as Restricted / Amateur Radio Apparatus.

To purchase this item, you must confirm:

  • You understand this is not a standard consumer device.
  • You hold the necessary authorization (e.g. Amateur Radio Licence) to operate it.

View full details

Product Details

RadioMaster Bandit Micro ExpressLRS 915MHz Module

Tired of failsafes dropping your quad into a muddy bog? The RadioMaster Bandit Micro ExpressLRS 915MHz RF Module is here to blast 1W of raw sub-GHz power through whatever sketchy treeline you are trying to dive. Engineered with TCXO clock stability, an active convection cooling fan, and a high-contrast OLED display, this long-range transmitter module keeps your control link rock-solid at up to 200Hz packet rates. Tailored for micro module bays like the RadioMaster TX16S MKII, Boxer, and TX12 MKII, it gives FPV pilots and fixed-wing operators maximum reliability. You can even solder the PCB UART pads to repurpose it as a 1000mW telemetry receiver if you really like over-engineering your setup.

Highlights

  • 1W Power Output: Up to 1000mW of low-latency penetration power to annihilate signal dropouts.
  • Convection Turbo Cooling: Built-in cooling fan and airflow channel prevent thermal throttling during high-power flights.
  • Built-in TCXO Oscillator: Frequency stability guaranteed, whether flying in freezing rain or summer heat.
  • OLED Display & Nav Key: Direct, painless access to ELRS LUA settings without fiddling through radio menus.
  • Dual-Purpose Hardware: Integrated solder pads allow re-flashing as a high-powered 1W telemetry receiver.

Why You Want It

Because watching your quad smash into concrete over a lost packet is a rookie mistake. The Bandit Micro combines 915MHz/868MHz range advantage with ExpressLRS ultra-low latency, wrapped in a housing that will not melt your radio bay. Support for both ExpressLRS and mLRS protocol gives you seamless MAVLink telemetry options for serious long-range missions.

Specs

  • Regulatory Domain: FCC915 / 868MHz
  • Main MCU: ESP32
  • Auxiliary MCU: ESP8285 (ExpressLRS Backpack)
  • RF Chip: Semtech SX1276
  • Refresh Rate: 25Hz / 200Hz
  • Max Output Power: 1000mW (1 Watt)
  • Input Voltage: XT30 DC 6V - 16.8V
  • Form Factor: Micro Standard 5-pin Connector
  • Weight: 78.0g (with T-antenna)
  • Dimensions: 64.1 x 49.6 x 34.1 mm

FAQ

Which radios fit the Bandit Micro module?

It natively fits any radio with a standard Micro module bay, including the RadioMaster TX16S MKII, Boxer, and TX12 MKII.

Do I need an external battery pack?

While bay power works for lower wattages, utilizing the external XT30 power port (6V-16.8V) is recommended when pushing full 1W output power.

In the Box

  • 1x RadioMaster Bandit Micro ExpressLRS RF Module
  • 1x 900MHz T-Antenna
  • 1x User Manual

#ExpressLRS #RadioMaster #BanditMicro #FPV #LongRangeFPV