UMT VTX-096 Ultra 2500 4.9G-5.8G 64CH VTX

Because burning standard 800mW video transmitters through tree lines gets old fast, the Ultra 2.5W 5.8GHz FPV VTX exists. Blasting up to 2500mW output power across 64 channels (including 4.9GHz bands), this high-power analog video transmitter keeps your analog video signal locked in when long-range FPV freestyle demands pure brute force. Built with an integrated microphone, wide 2-8S voltage input, and full IRC Tramp telemetry control, it is engineered for quadcopters that actually leave the flying field. We have spent ten years fixing burnt-out builds—just paste your Betaflight VTX table and stop flying into static.

Highlights

• 2500mW Max Output: Blasts through foliage and interference with switchable pit mode up to 2.5W.
• 64 Channel Support: Ultra-wide band coverage spanning 4.9GHz up to 5.8GHz frequencies.
• 2-8S Direct Input: Accepts DC 7-36V directly from your main flight battery without external BECs.
• IRC Tramp Protocol: Adjust channels, bands, and power levels seamlessly via your OSD or transmitter.

Why You Want It

If you enjoy losing video feed behind a single oak tree, buy something else. The Ultra 2.5W VTX is designed for long-range pilots and freestyle abusers who demand uncompromising signal penetration. Featuring standard 30.5x30.5mm mounting, an MMCX connector that will not rip off during hard impacts, and an onboard 5V BEC to cleanly power your camera, it eliminates power brownouts while maintaining clean signal delivery.

Specs

• Model: Ultra2500 2.5W VTX
• Input Voltage: DC 7-36V (2-8S Battery)
• Output Power: 25mW / 400mW / 800mW / 1500mW / 2500mW / Pit mode
• Frequency Bands: 4.9GHz - 5.8GHz (64 Channels)
• Protocol: IRC Tramp
• Antenna Connector: MMCX connector
• Cable Connector: GH1.25-6P connector
• Camera Output: 5V @ 600mA
• Video Format: PAL / NTSC
• Input Impedance: 75Ω
• Microphone: Built-in microphone
• Dimensions: 36.5mm x 36.5mm x 12mm
• Mounting Pattern: 30.5mm x 30.5mm (M3)
• Weight: 15g (without cable)
• Shipping Weight: 0.1kg

FAQ

How do I set up this VTX in Betaflight?

For Betaflight 4.1.0 and above, you must load the Ultra2500 VTX Table JSON file into the Betaflight Configurator VTX tab to enable IRC Tramp control via your remote control or OSD.

What antenna connector does this unit use?

It utilizes a robust, board-mounted MMCX connector. Make sure to attach your MMCX antenna or pigtail before powering up to prevent damage.

In the Box

• 1x Ultra 2.5W 5.8GHz VTX
• 1x GH1.25 6-Pin Wiring Cable

#FPV #FPVVTX #LongRangeFPV #PinoyFPV #UnmannedTech