Product Details
Happymodel Mobula8 2S 85mm Micro FPV Whoop (UART ELRS)
Look, we know. You promised your partner (and your wallet) that the last drone was "the one." But let’s be real: addiction is a spectrum, and you’re hovering somewhere between "casual hobbyist" and "selling furniture to buy lipos." The Happymodel Mobula8 is here to justify your relapse. It’s an 85mm 2S FPV Whoop that finally ditches the erratic SPI receivers for a proper UART ELRS setup, meaning you might actually finish a flight without failsafing into a tree just to spite the concept of RF physics.
Why You Want It
Because flying indoors is cramped and flying a 5-inch outside requires filing a flight plan with the CAA and sacrificing a goat to the weather gods. The Mobula8 sits in that sweet spot: small enough to thread through a playground structure, but angry enough on 2S power to feel like a real quad. With 400mW VTX output, you can blast through walls—or at least get a clear feed while you crash behind them. It’s basically a toothpick with prop guards, designed for people who like going fast but hate replacing props every three minutes.
Specifications
- Weight: 42g (lighter than the guilt of buying it).
- Wheelbase: 85mm (the "Goldilocks" zone of micro drones).
- FC: X14 5-in-1 AIO with STM32G473 (a brain big enough to handle your PID errors).
- Receiver: Onboard UART ELRS V3.0 (firmware updates won't make you cry anymore).
- Motors: EX1103 11000KV (screams like a banshee, moves like a cheetah).
- VTX: OpenVTX up to 400mW (cooks eggs, transmits video).
- Camera: Caddx Ant 1200TVL (because seeing the branch you hit is important).
- Battery Connector: XT30 (standardise your life).
What’s in the Box*
- 1× Mobula8 Frame (Assembly required? No, thankfully).
- 1× X14 ELRS AIO Flight Controller (Pre-installed, don't touch it).
- 4× EX1103 KV11000 Brushless Motors.
- 1× Caddx Ant Camera.
- 1× Gemfan Hurricane 2023 Props set (plus spares, you'll need them).
- 1× Screwdriver (for when you inevitably tinker and break it).
Product Notes
Batteries are not included. We recommend a 2S 450mAh or 550mAh. Do not plug in a 6S unless you want to see magic smoke in 4K. Also, this runs ELRS V3.0; if your radio is still on V2, update it. It’s 2025, sort it out.
Brand Name: Happymodel
Model: Mobula8 UART ELRS V3
Item Name: 2S 85mm Micro FPV whoop drone
Wheelbase: 85mm
Size: 120mm*120mm*50mm
Weight: 42g
Receiver option: 2.4GHz UART ExpressLRS
|
Motor |
Mode: EX1103 KV11000 |
|
Propellers |
Weight:0.88g |
|
Flight controller |
X14 ELRS AIO 5-IN-1 Flight controller |
|
Onboard 4in1 ESC |
Power supply: 1-2S LiPo/LiPo HV |
|
Onboard uart ExpressLRS 2.4GHz Receiver |
Serial ExpressLRS 2.4GHz |
|
Onboard 5.8g OPENVTX |
OPENVTX Firmware |
|
Caddx ANT 1200tvl camera |
Image Sensor: 1/3″ CMOS Sensor |
Disclaimer
We guarantee the drone arrives in one piece; we cannot guarantee it remains that way after you attempt a power loop in your living room.
Still Here?
You’re reading the footer of a product page for a toy helicopter. If you were going to be responsible, you would have closed the tab five minutes ago. Just add the micro drone to your cart so we can pay our server bills and you can go back to pretending you’re a pilot. Or don't, and let your squadmate get the flight footage while you watch from the bench.