Introducing iFlights first ultra-light LongRange 4inch BNF. Newest iFlight SucceX hardware on board coupled with our XING 1404 motors in different kv classes. Slow cruising or speedy action, something for every taste. Get flight times above 15min using at least 4S 850mAh packs. Go crazy and strap a Li-On 4S pack on and go even further, depending on capacity and weight!
GPS Rescue ready for easy recovery in case of signal loss, or even if you've been surfing those mountains and suddenly can't find the way back home.. Betaflight OSD pre-setup GPS elements will show you the way!. Custom iFlight 150mm LR antenna for best signal coverage even at long distance.
The CHimera4 includes an integrated receiver for the DJI Remote, but if you want to use your own receiver such as TBS crossfire you will need to install this yourself, there is space to mount your Crossfire and T antenna.
Features
-
Sub 250g long-range quad
-
XING 1404 Ultralight motors
-
X-Geometry body for high performance handling and max. authority on pitch axis
-
DC (DeadCat geometry) bottom plate available (additional item, no props in view)
-
GPS pre-installed for more safety at distance
-
SucceX-E mini F4 +35A 4in1 ESC Flystack
-
Naked GoPro ready
-
360° TPU protection, Vista cam protection and antenna mounts
-
Caddx Vista Digital HD System
Pre Tuned and Setup
-
Pre tuned by Iflight, a general PID- and Filter tuning was applied for a great flight experience!
-
To restore lost tunes or updates, please check out
Iflight CLI FIrmware settings here
-
Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
-
GPS Rescue is OFF by default to prevent from unwanted or unexpected drone behaviour as this is still an experimental feature. Please see our article on
how to enable GPS rescue mode
Specifications
Frame: Chimera4
-
Wheelbase: 178mm
-
Main body dimension: 136.8*114.8mm
-
Bottom to top distance: 28mm
-
Arm thickness: 4mm
-
Bottom plate thickness: 4mm
-
Top plate thickness: 2mm
-
TPU Camera plate thickness: 2mm
-
FC: 25.5*25.5mm/20*20mm/16*16mm
-
FPV Cam: 19mm Micro / 20mm
Succex-E Mini F4 Stack
SucceX-E mini F4
-
- MCU: 168MHz STM32F405
-
- Gyro: MPU6000
-
- Blackbox: 8MB
-
- Betaflight OSD: YES
-
- BEC: 5V 2.5A
-
- Uarts: 5
-
- ESC Telemetry: yes
-
- INA Pad: nuart2
-
- Input voltage: 2-6S
-
- Size: 25*25mm /20*20mm φ3 mounting
-
- Weight: 4g
-
- Firmware: BETAFLIGHTF4
-
Physical
-
- Mounting hole: 20*20mm,φ3mm
-
- Size: 25*25mm
-
NOTE: F.PORT protocol RX input support, telemetry not supported.
ESC // SucceX-E Mini 35A
-
MCU: BB21 F16G
-
BLHeliS
-
Capacitance: 470uF/50V
-
Current Sensor: Yes
-
Input: 2-6S LIPO
-
Constant: 35A / Burst: 40A
-
BEC: No
-
Supports up to Dshot600, Proshot, Oneshot, Multishot
-
Target: G-H-30
-
BLHeliSuite download: http://www.mediafire.com/file/1tn449x6815upat/BLHeliSuite16714901.zip/file
-
Weight: 6.9g
-
Mounting pattern: 20*20, φ3mm with Grommets φ2mm
-
Dimensions: 31*30mm (including the power pads)
Includes
Pre-built and indoor tested Quadcopter
-
1x Chimera4 frame
-
1x Caddx Vista Digital HD System Kit (optional)
-
2x Albatross LHCP ipex 160mm antenna
-
2setsx Nazgul 4030 props (Set of 2 - Color may vary)
-
2x 15*150mm Microfiber PU Leather Battery Strap (Color May Vary)
Suggested Extra Parts
-
4S 850mAh (LINK) / 4S 1100mAh
-
TPU Naked GoPro Mount (LINK)
-
DJI HD FPV Goggles
-
Radio Controller
-
DJI Remote Controller