Knowledge Base

Pixhawk is an open-source autopilot platform running ArduPilot or PX4. Learn what it is, why drone builders choose it, and how it differs from FPV...

Learn how to set up drone telemetry radios for long-range MAVLink communication. Covers Microhard P900 vs P400, Pixhawk wiring, and mesh networking configuration.

A drone airspeed sensor measures how fast air moves over the aircraft. Learn how pitot tubes work, why GPS is not enough, and which drones...

DroneCAN and PWM are the two main protocols for connecting peripherals to your flight controller. This guide explains the differences and when to use each.

The Seeed Studio XIAO is a family of thumb-sized dev boards for embedded projects, wearables, and IoT. This overview covers the XIAO family, what you...

Learn how to set up the Seeed XIAO nRF52840 with Arduino IDE in five simple steps. This guide covers board manager installation, firmware upload, and...

Set up the Seeed Studio Round Display for XIAO with this tutorial. Covers Arduino library installation, project ideas, and LVGL for advanced UIs.

Set up Meshtastic LoRa mesh networking on the XIAO nRF52840 with the Wio-SX1262 kit. Step-by-step firmware flashing, app pairing, and region configuration.

The XIAO nRF52840 and Sense share the same chip and wireless stack. The Sense adds a 6-axis IMU and PDM mic. Here is how to...

F4, F7, and H7 are the main flight controller processor families. Learn which one suits your FPV build, from budget freestyle to GPS-equipped long range.

The gyroscope on your flight controller determines how your drone senses movement. Compare the MPU6000 and ICM42688 and learn which suits your build.

Step-by-step guide to picking a flight controller for your FPV drone. Covers processor, size, UARTs, features, and firmware compatibility.