Running Out of UART Ports: How We Wire GPS, VTX, and ELRS on the Same Flight Controller
Learn how to plan UART ports on your FPV flight controller. Covers ELRS receiver, GPS, VTX SmartAudio wiring priority, and what to do when you...
Learn how to plan UART ports on your FPV flight controller. Covers ELRS receiver, GPS, VTX SmartAudio wiring priority, and what to do when you...
The FPV drone build order that prevents lifted pads, cold joints and costly rework. We share the exact soldering sequence we use on every drone...
The FPV build mistakes we encounter most in our workshop, from cold solder joints to reversed motor wires. Covers soldering technique, motor direction checks, wiring...
How to set up your FPV VTX for reliable video. Covers SmartAudio wiring, Raceband channels, power levels, and the three overheating mistakes we see weekly.
How frame flex ruins FPV PID tuning. Covers carbon thickness, arm deflection, true-X vs deadcat stiffness, and the signs your frame is the real tuning...
How far can an FPV drone fly? Covers ELRS and Crossfire control link range, analog and digital video range, and what actually limits your signal...
How to fix FPV drone prop wash wobble. Covers D-term tuning, dynamic notch filters, propeller selection, and frame stiffness. Practical tips from our workshop.
A practical pre-flight checklist for FPV drone pilots covering battery voltage, prop inspection, radio and failsafe verification, and GPS lock before flying.
Step-by-step guide to fix an FPV drone that flips on takeoff. Covers prop placement, motor direction, wire order, and ESC protocol. Common first-flight problems solved.
How to configure Betaflight rates for your FPV drone. Covers RC Rate, Expo, and Super Rate settings with practical tuning tips for beginner to advanced...
How to choose and adjust your FPV drone camera angle for freestyle, racing, and cinematic flying. Covers tilt ranges, flight dynamics, mounting tips, and common...
How to position VTX, GPS, and ELRS antennas on your FPV build. Covers 5.8GHz video, GPS patch placement, and receiver antenna orientation plus common mistakes.