How to protect FPV drone electronics from moisture using silicone conformal coating. Covers which components to coat, application method, drying time, and UK weather considerations....
Learn what causes FPV drone flyaway and how to prevent it. Covers motor order errors, board orientation, gyro drift, ESC desync, and GPS Rescue setup....
How to fix an FPV drone that drifts in Angle or Horizon mode. Covers accelerometer calibration, board alignment, FC mounting, prop condition, centre of gravity,...
Why every FPV drone build needs a smoke stopper before first power-on. Covers how PTC fuses protect against solder bridges, reversed polarity, and short circuits....
How to fix horizontal lines in your FPV video feed using a low-ESR capacitor. Covers capacitor selection, soldering placement, LC filters, and testing. Workshop-tested advice...
How to set up turtle mode on your FPV drone. Covers DShot requirements, Betaflight switch config, when NOT to use it, and workshop tips from...
How to fix a flight controller that will not connect to Betaflight. Covers USB cable issues, driver installation for STM32, CP210x, and CH340 chips, DFU...
How to diagnose and fix FPV drone throttle dropouts. Covers battery voltage sag, ESC overheating, connector resistance, and Betaflight settings that cause power loss mid-flight.
How to fix FPV drone jello caused by vibration. Covers prop balance, camera soft mounting, motor checks, and Betaflight filter tuning from our workshop.
How to diagnose FPV drone crash damage with a five-step checklist. Covers frame cracks, bent motors, FC checks, video system, hover testing, and LiPo safety.
How to diagnose and fix FPV video static on your drone. Covers antenna checks, VTX settings, cable faults, and environmental interference with step-by-step solutions.
How to set up a buzzer on your FPV drone to find it after a crash. Covers passive buzzers, self-powered finders, Betaflight configuration, DSHOT beacon...