How to Flash ESC Firmware: Bluejay, BLHeli and AM32 Guide
Learn how to flash ESC firmware with Bluejay, BLHeli_S, or AM32. Step-by-step guide covering bi-directional DShot, RPM filtering, and fixing flash errors.
Learn how to flash ESC firmware with Bluejay, BLHeli_S, or AM32. Step-by-step guide covering bi-directional DShot, RPM filtering, and fixing flash errors.
Learn how Betaflight filters work and how to configure dynamic notch, low-pass, and RPM filters. Covers gyro LPF, D-term filtering, blackbox analysis, and practical tuning...
Learn how to mount and wire brushless motors on your FPV drone frame. Covers screw selection, wire routing, ESC soldering, and setting motor direction in...
How to configure FPV camera settings for the clearest picture through your goggles. Covers WDR, brightness, contrast, sharpness, saturation, and camera tilt for freestyle, racing,...
Learn how to set up Betaflight OSD on your FPV drone. Covers enabling elements, positioning text, wiring requirements, and troubleshooting common OSD problems for analogue...
How to add FPV to your RC plane. Covers camera selection, video transmitter setup, antenna choice, and installation tips for first-person view flying.
Understand the difference between fixed-wing and multirotor drones. Covers flight time, speed, hover capability, launch methods, and which type suits beginners.
Learn how to tune PID values on your FPV drone flight controller. Covers P, I, and D gains, Betaflight filter settings, common oscillation fixes, and...
A practical guide to the TBS Chupito compact FPV flying wing. Covers assembly tips, battery choices, community modifications, and flight performance for pilots who want...
Understand the differences between H-frame, X-frame, and True-X quadcopter configurations for FPV flying. Learn which layout suits racing, freestyle, or pure speed optimisation.
Learn how to solder FPV drone components with the right iron, solder, and flux. Covers temperature settings, pad tinning, wire joining, and common mistakes for...
How to build a 5-inch FPV freestyle drone from parts to first flight. Covers frame selection, FC stacks, motors, ESCs, VTX, wiring and Betaflight setup.