The GPS Logger Does Not Lie: How Fast FPV Drones Actually Go in the Real World

The GPS Logger Does Not Lie: How Fast FPV Drones Actually Go in the Real World

Real GPS-verified top speeds for FPV drones by build class. Covers whoops, 3.5-inch, 5-inch freestyle, and racing builds. What limits speed and how to measure...

Jun 19, 2026 4 min read
The 50-Flight Service: FPV Drone Maintenance We Do on Every Quad in Our Workshop

The 50-Flight Service: FPV Drone Maintenance We Do on Every Quad in Our Workshop

How to maintain your FPV drone with a 50-flight service interval. Covers motor inspection, propeller replacement, solder joint checks, frame hardware, and the bench kit...

Jun 15, 2026 4 min read
The Cold Joint That Fell Apart at 200 Metres: FPV Soldering Quality From Our Workshop

The Cold Joint That Fell Apart at 200 Metres: FPV Soldering Quality From Our Workshop

How to identify and fix cold solder joints on FPV drone builds. Covers joint inspection, soldering temperature, flux usage, and the joints that fail most....

Jun 15, 2026 4 min read
We Put 20 Builds on a Scale: What It Actually Takes to Stay Under 250g

We Put 20 Builds on a Scale: What It Actually Takes to Stay Under 250g

Build an FPV drone that stays under the UK CAA 250g line. Covers A1 Open category rules, a component weight budget, and the accessories that...

Jun 14, 2026 3 min read
The Number That Decides How Your Quad Flies: Why We Calculate Thrust-To-Weight on Every Build

The Number That Decides How Your Quad Flies: Why We Calculate Thrust-To-Weight on Every Build

How to calculate thrust-to-weight ratio for FPV drone builds. Covers the TWR formula, ideal ratios by flying style, and real workshop examples from our bench.

Jun 06, 2026 4 min read
After 200 Customer Builds, We Stopped Recommending 5-Inch to Beginners

After 200 Customer Builds, We Stopped Recommending 5-Inch to Beginners

Why we recommend a 2.5-inch cinewhoop over a 5-inch build for first-time FPV pilots. Covers safety, cost, CAA rules, and our workshop learning progression.

May 30, 2026 4 min read
The £12 Part That Saved £300 of Electronics: Why We Never Power On Without a Smoke Stopper

The £12 Part That Saved £300 of Electronics: Why We Never Power On Without a Smoke Stopper

Why every FPV drone build needs a smoke stopper before first power-on. Covers how PTC fuses protect against solder bridges, reversed polarity, and short circuits....

May 28, 2026 3 min read
The Noise Lines on Every First Build: FPV Power Filtering From Our Workshop

The Noise Lines on Every First Build: FPV Power Filtering From Our Workshop

How to fix horizontal lines in your FPV video feed using a low-ESR capacitor. Covers capacitor selection, soldering placement, LC filters, and testing. Workshop-tested advice...

May 27, 2026 3 min read
The 8-Inch Long Range Quad We Can't Stop Flying: Complete Build Guide

The 8-Inch Long Range Quad We Can't Stop Flying: Complete Build Guide

How to build an 8-inch long range FPV drone with the right motors, props, and battery for 20-35 minute flights. Includes our tested parts list...

May 21, 2026 4 min read
The Battery That Fell Out at 100m: FPV Battery Mounting Done Right

The Battery That Fell Out at 100m: FPV Battery Mounting Done Right

How to mount your FPV battery with the right strap, pad, and routing. Covers Kevlar vs silicone straps, anti-skid pads, and CG positioning for secure...

May 19, 2026 4 min read
The Frame We Wish We'd Bought First: How to Choose the Right FPV Frame

The Frame We Wish We'd Bought First: How to Choose the Right FPV Frame

How to choose the right FPV frame for your build. Covers sizes from whoop to 7-inch long-range, arm thickness, Deadcat vs True-X, with picks from...

May 17, 2026 3 min read
Why Your FPV Drone Feels Sluggish: The Weight Mistakes We See in Every Build

Why Your FPV Drone Feels Sluggish: The Weight Mistakes We See in Every Build

How excess weight destroys FPV drone performance. Covers component weight budgets, wire trimming, and the build mistakes that add unnecessary grams.

May 14, 2026 4 min read