The GPS That Couldn't See Satellites: Why Placement Matters More Than the Module
Why your FPV drone GPS cannot find satellites and how to fix it. Covers VTX interference, mast mounting, cable routing, and Betaflight satellite lock testing.
Why your FPV drone GPS cannot find satellites and how to fix it. Covers VTX interference, mast mounting, cable routing, and Betaflight satellite lock testing.
How to set up RPM filtering in Betaflight using bidirectional DShot. Covers ESC firmware, motor poles, step-by-step config, and workshop troubleshooting.
How to set up blackbox logging in Betaflight and analyse flight data for PID tuning. Covers storage, sample rates, trace analysis, and common mistakes.
Learn how to plan UART ports on your FPV flight controller. Covers ELRS receiver, GPS, VTX SmartAudio wiring priority, and what to do when you...
How to configure Betaflight rates for your FPV drone. Covers RC Rate, Expo, and Super Rate settings with practical tuning tips for beginner to advanced...
Learn how Betaflight filters work and how to configure dynamic notch, low-pass, and RPM filters. Covers gyro LPF, D-term filtering, blackbox analysis, and practical tuning...
Learn how to set up Betaflight OSD on your FPV drone. Covers enabling elements, positioning text, wiring requirements, and troubleshooting common OSD problems for analogue...
Learn how to configure GPS Rescue in Betaflight for automatic return-to-home on failsafe. Covers hardware selection, wiring, parameter tuning, and common problems.
Learn how to tune PID values on your FPV drone flight controller. Covers P, I, and D gains, Betaflight filter settings, common oscillation fixes, and...
Learn how to find and adjust your FPV drone's centre of gravity for stable flight. Covers battery placement, FC positioning, balance test methods, and common...
Wie man Holybro Tekko32 F4 ESC mit AM32 Firmware einrichtet. Eine vollständige Anleitung, die Flashing, Verkabelung, Telemetrie-Einrichtung und Fehlerbehebung für FPV-Drohnen-Builds abdeckt.
Wie man den CubePilot Power Brick Mini und das Power Selection Module für eine zuverlässige Stromversorgung von Cube-Autopiloten verwendet. Behandelt Verkabelung, Dual-Batterie-Setups und Kalibrierung.