Product Details
SIYI R1M Recording FPV Camera
Keep a recording on board while your SIYI link handles the live view. The R1M combines Ethernet video output with microSD recording at up to 1080p and 30 fps, in a 42 x 42 x 25 mm camera body.
Key Highlights
- Full HD recording: Save 1920 x 1080 footage at 30 fps, with 720p at 30 fps also supported.
- Ethernet video: Connect to a compatible SIYI air unit, or integrate with an Ethernet image-transmission system that supports the camera's RTSP stream.
- Useful field of view: A 90° diagonal and 80° horizontal view gives you a clear forward-looking perspective.
- Card-based maintenance: The microSD slot supports recording and camera firmware updates.
Why You Want It
The R1M suits a fixed forward-view installation where you already have, or are building, a compatible Ethernet video link. You can watch the live feed through the transmission system and start or stop the camera's card recording in the SIYI FPV app. It is a camera component, not a complete wireless video system: the air unit and ground-side equipment still have jobs to do.
Specifications
- Video output: Ethernet; RTSP stream support.
- Recording resolutions: 1080p (1920 x 1080) at 30 fps; 720p (1280 x 720) at 30 fps.
- Image sensor: 1/2.9-inch.
- Field of view: 90° diagonal; 80° horizontal.
- Supply: 12 V DC.
- Power consumption: 3 W.
- Operating temperature: -10 to 50°C.
- Ingress rating: IP4X.
- Camera dimensions: 42 x 42 x 25 mm, excluding cable.
- Manufacturer-stated weight: 39 g.
- Cable length: 60 cm.
- Recording bitrate: 12 Mbps.
- Memory card: Class 10 microSD, up to 32 GB; FAT32 file system.
Compatibility and Connections
SIYI lists compatibility with UniRC 10, UniRC 7, MK32, HM30 and MK15 air units. The original R1M graphic also identifies MK15E and VD32 air units. Third-party integration requires Ethernet video input, RTSP support and a correctly wired connection cable; check the receiving system's requirements before connecting.
FAQ
Does this replace the complete video link?
No. The R1M outputs video over Ethernet. It needs a compatible image-transmission system and display setup to provide a wireless live view.
How do I record video?
Insert a suitable Class 10 microSD card, then use the Record button in the SIYI FPV app to start and stop recording. SIYI documents recording control with app version v393 and later.
Can I use it with a third-party system?
Yes, if that system provides a compatible Ethernet connection and supports RTSP video. Prepare the correct cable and verify the pinout and 12 V supply before connection.
What is the default network address?
The default camera IP is 192.168.144.25. The documented RTSP address is rtsp://192.168.144.25:8554/main.264. Avoid address conflicts when adding the camera to your network.
What's in the Box
- 1 x SIYI R1M Recording Camera.
Disclaimer
Use a suitable 12 V DC supply and follow the R1/R1M manual when wiring the camera. Check the pinout rather than trusting wire colours, leave the reserved connector alone and keep the camera dry.
Still Here?
If your build needs a compact Ethernet camera with local recording, add the R1M to your setup and leave the action-camera balancing act for another day.