RFDesign RFD900u/ux Antenna Adapter Cable - u.FL to SMA Bulkhead

Congratulations, you’ve reached the part of your build where you realise your tiny radio has tiny connectors. This cable is the bridge between 'delicate precision' and 'industrial reality.' If you're using an RFD900u or 900ux, you’ve likely realised that trying to push an SMA antenna onto a u.FL connector is like trying to fit a double-decker bus through a garden gate. This cable is the magical bridge that prevents you from snapping off the tiny connectors on your expensive radio gear.

Why You Want It

Because you spent way too much on your RFD900u to ruin it with a soldering iron and tears. This 150mm piece of wizardry lets you mount a proper SMA antenna to your chassis while keeping the delicate u.FL connection tucked away safely. It’s the unsung hero of your ground station, or that drone you've been building for three months and still haven't flown because the weather in the UK is, well, British.

Specs

• Connector A: u.FL (IPX) (The one that requires tweezers and a magnifying glass)
• Connector B: SMA Female Bulkhead (The beefy one you can actually hold)
• Cable Length: 150mm (Just enough to get where you need to go)
• Weight: 4.3g (Lighter than your existential dread)
• MPN: CABLE-RFD900u-Antenna(SMA)
• Manufacturer: RFDesign (The adults in the room)

In the Box

• 1x RFD900u/900ux Antenna Cable (SMA Female Bulkhead to u.FL)

Compatibility

Specifically engineered for the RFDesign RFD900u and RFD900ux. Note: This is a standard SMA connector. If your antenna has a pin in the middle (RP-SMA), you are looking at the wrong product. Don't worry, we've all been there, but don't say we didn't warn you.

Highlights

• No-Wiggle Design: The bulkhead connector ensures your antenna stays attached to your frame, not just your hopes and dreams.
• Gold Plated: Because shiny things look more professional in your build logs.
• Perfect Length: 150mm provides the flexibility to route around the mess of wires you call 'cable management.'

Notes

Ensure you have enough clearance for the bulkhead nut. Tighten with care; u.FL connectors have the structural integrity of wet cardboard if you're too aggressive during installation.

Disclaimer

We are not responsible for antennas lost to gravity or cables accidentally used as dental floss. Handle with care, you brute.

Still Here?

You’re actually reading the long-form description of a pigtail cable. You must be deep in the spec-sheet rabbit hole. Go on, add it to the basket so you can finally finish that build and realise you forgot the heat shrink. #LongRangeTelemetry #RFDesign #SMAAdapter #FPVUK #MakerLife