Product Details
BETAFPV P1 HD VRX Nano — Fat Shark / SKYZONE
Keep the goggles you know and add an ArtLynk HD video feed. Choose the Fat Shark or SKYZONE version for your supported goggles. Both use mini HDMI, but the case dimensions, supported models and internal-power setup differ.
Key Highlights
- Keep your headset:Add digital reception to the listed compatible goggles without buying a replacement pair.
- HD video: Supports a 1080p at 60fps feed from a compatible ArtLynk transmitter.
- Variant-specific fit:Fat Shark: 39 x 62 x 36mm, 36g. SKYZONE: 32 x 64 x 36mm, 33g. All figures exclude antennas; select the version for your goggles.
- Power options: A 5.5-26.4V input, with internal goggles power available subject to model-specific setup.
Why You Want It
If your supported goggles still do the job, the Nano gives them a route into the ArtLynk system used by the BETAFPV P1 Air Unit. Selectable channels across 5.3-5.8GHz let you move away from a busy channel. Usable range depends on the antennas, surroundings and RF conditions.
Specifications
- Version: Fat Shark or SKYZONE, selected using Goggle version.
- Compatible goggles: Fat Shark: HDO+, HDO2, HDO, AttitudeV6, Dominator HD3, Dominator V3. SKYZONE: SKY04L, SKY04X, SKY04O, SKY04X PRO, SKY04O PRO.
- Dimensions, excluding antennas: Fat Shark: 39 x 62 x 36mm. SKYZONE: 32 x 64 x 36mm.
- Weight, excluding antennas: Fat Shark: 36g. SKYZONE: 33g.
- Video protocol: ArtLynk
- Transmission resolution: 1080p at 60fps
- Frequency range: 5.3-5.8GHz
- Bitrate: 25Mbps
- Input voltage: 5.5-26.4V
- Ports: USB Type-C, mini HDMI, microSD card slot and 2-pin PH2.0 connector
- Antenna connectors: RP-SMA female, external thread with inner hole
- Memory card support: Up to 1TB microSD
FAQ
Which goggles does each version fit?
Choose Fat Shark for HDO+, HDO2, HDO, AttitudeV6, Dominator HD3 or Dominator V3. Choose SKYZONE for SKY04L, SKY04X, SKY04O, SKY04X PRO or SKY04O PRO. The cases are version-specific; check your exact model before ordering.
Will every compatible pair show 1080p?
The receiver supports a 1080p/60fps video feed, but the goggles also determine the image you see. Fat Shark Dominator HD3 and Dominator V3 require 720P output and compatible receiver firmware. Follow BETAFPV’s resolution-switching instructions for your receiver firmware.
Can it take power directly from my goggles?
Fat Shark HDO+, HDO2, HDO, AttitudeV6 and Dominator HD3 require disassembly and modification for internal power. Dominator V3 is not listed for internal power in BETAFPV’s table; do not assume the same modification applies.
For SKYZONE, SKY04X PRO and SKY04O PRO need the specific firmware provided by BETAFPV for internal power, without disassembly. BETAFPV’s tutorial specifies jumper-wire soldering for SKY04O, SKY04L V2 and SKY04X V2. Do not assume every earlier SKY04L or SKY04X revision uses that procedure. Follow the exact model and firmware instructions before making changes.
Which video transmitter should I use?
Use a compatible ArtLynk transmitter, such as the BETAFPV P1 Air Unit. A shared frequency band alone does not establish compatibility with a different digital system.
What's in the Box
- 1 × P1 HD VRX Nano in your selected Fat Shark or SKYZONE version.
Disclaimer
Goggles and an airborne video transmitter are not included. Internal-power modifications can affect the goggles' warranty. Check hardware revision and firmware instructions before opening the case, and use only locally permitted frequencies and power settings.
Still Here?
Check your goggles against the compatibility list, then choose the matching Nano. Your old headset may have another chapter in it yet.