BETAFPV 1102 Brushless Motors (2026 Edition) | 21000KV 1S Whoop Power

Let’s be real: you’re here because you’ve either burned out your old motors or you’ve sent your Meteor75 Pro II into a brick wall at Mach 1. Don't worry, we’ve all been there. The 2026 edition of the 1102 brushless motor is specifically designed for pilots who treat their drones like bumper cars but still want the efficiency of a high-end coffee machine.

Why You Want It

Unlike your previous flight performance, these motors are actually efficient. We’re talking a 15% boost in efficiency thanks to an improved slot fill factor. What does that mean for you? More air-time and less time staring at a low-battery warning. They are built with a 2000 series outer rotor housing because regular metal apparently isn't enough to survive your 'creative' flight paths. It’s tough, it’s light (2.85g), and it’s probably better than you deserve.

Specs

• KV: 21000KV (High-RPM screams included)
• Maximum Power: 35W (Enough to outrun your responsibilities)
• Maximum Current: 9.2A
• Rated Voltage: 4.2V (Strictly 1S, don't get funny with it)
• Weight: 2.85g (Per motor, obviously)
• Shaft Diameter: ø1.5mm (Reinforced for your 'landing' style)
• Shaft Length: 5mm
• Wire Gauge: 28AWG
• Wire Length: 37mm
• Connector: JST1.25-3Pin (Plug and play, no soldering tears today)
• Motor Mounting Hole: 3*M1.4 EQS ø6.6

In the Box

• 4x 1102 Brushless Motors (2026 Edition)
• 16x M1.4 * 4 Phillips Screws (Keep them away from the carpet)

Compatibility

Optimized for the Meteor75 Pro II and compatible with frames like the Meteor75 Pro. Best paired with GF 1811 3-Blade Props if you actually want that 15% efficiency we keep bragging about. Works seamlessly with the Matrix 1S AIO FC series.

Highlights

• 2000 Series Rotor: Because your drone deserves a helmet too.
• Reinforced Shaft: Built to withstand gravity’s constant bullying.
• Efficiency King: 15% more thrust for your 1S setup without the extra weight.
• Plug and Play: JST connectors because life is too short to burn your fingers with a soldering iron.

Notes

Specifically designed for 1S builds. If you try to run 2S through these, you’ll be buying another set from us within minutes. Actually, go ahead, our servers are ready.

Disclaimer

Unmanned Tech is not responsible for any walls, trees, or egos damaged during the use of these high-performance motors. Fly responsibly-ish.

Still Here?

You’re really dissecting the specs of a 2.85g motor? Just buy the pack, swap out your bent ones, and get back in the air. Your Meteor75 Pro II is lonely. Stop reading and start flying. #TinyWhoop #BetaFPV #FPVLife #1SWhoop #UnmannedTechUK