Passer aux informations produits
1 de 5

RunCam

SkyGuy Max 2.4G ExpressLRS Receiver

SkyGuy Max 2.4G ExpressLRS Receiver

SKU:SG-MAX-2G4-RX

Prix habituel £21.90 GBP
Prix habituel Prix promotionnel £21.90 GBP
Promotion Épuisé
Taxes incluses. Frais d'expédition calculés à l'étape de paiement.
Quantité

En stock

Afficher tous les détails

Détails du produit

SkyGuy Max 2.4G ELRS

Look, we get it. You spent three weeks building a quad, four hours soldering, and exactly thirty seconds flying before your previous budget receiver decided to ghost you like a bad Tinder date. Enter the SkyGuy Max 2.4G ELRS Receiver. It’s got more range than your local kebab shop delivers to, and it’s probably more reliable than your internet connection during a rainstorm in Birmingham. It’s the Max version, because apparently, size—or at least sensitivity—does matter when you're pushing the limits of physics and your own insurance policy.

Why You Want It

Specifications

  • Model: SkyGuy Max 2.4GHz RX
  • Name: ExpressLRS Receiver
  • Frequency: 2.4GHz
  • Antenna: T-antenna (52*79mm, 0.9g / 62*88mm, 2.2g)
  • Chip: SX1280+ESP32-C3
  • Power Options: 25mW, 50mW, 100mW, 250mW, 500mW, 1000mW (Note: Use the appropriate power level in compliance with local laws and regulations.)
  • Input Voltage: 5V
  • Antenna Connector: IPEX1
  • Weight: 6 gram / 7.3 gram (antenna and CNC included)
  • Dimensions: 16mm*27mm*7.5mm
  • Default Firmware: SkyGuy Max 2.4GHz RX 3.6.2

LED Status

  • Double Blinking Yellow: Binding Mode
  • Slow Blinking Yellow: Powered on; no transmitter signal detected.
  • Solid RGB Light: Successfully connected; receiving signal.
  • Green Breathing Flash: Wi-Fi active (ready for firmware updates)

Additional Notes

  • To Enable Wi-Fi: Wait 60 seconds after power-on, or press and hold the button for 5 seconds.
  • To Enter Binding Mode: Power cycle (On/Off) 3 times rapidly, or press and hold the button

In the Box

  • 1x SkyGuy Max 2.4G ELRS Receiver
  • 1x High-Gain T-Antenna
  • 1x Silicone Wire Set (Length: Just enough to be annoying)
  • 1x Heatshrink Tube

Compatibility

Works with literally any 2.4GHz ELRS TX module. If you're still trying to bind this to your old FrSky D8 setup, we admire your optimism but weep for your logic. Updates via Wi-Fi, because searching for a Micro-USB cable is a form of torture outlawed by the Geneva Convention.

Highlights

  • TCXO Integrated: Stays stable even when the British weather fluctuates between 'mild' and 'arctic' in five minutes.
  • High Power Telemetry: So you can see your battery sag in real-time from three miles away.

Notes

Requires ELRS V3.0 firmware or higher. If you're still on V2, stop reading this and go update your transmitter. It’s for your own good, and we're tired of answering the support tickets.

Disclaimer

Range is subjective. If you fly behind a lead-lined bunker or a mountain, you're still going to crash. Don't blame us.

Still Here?

You’re either an SEO crawler or someone who enjoys reading fine print more than actually flying. Quit stalling, add the SkyGuy Max to your cart, and go send it. Your quad is getting lonely in the workshop. #SkyGuyELRS #ExpressLRS #FPVLife #LongRangeFPV #UnmannedTechShop