GEPRC GEP-F722-HD V2

Look, we know the drill. You bought a soldering iron, and now you think you're an electrical engineer. Spoiler: you're not. That's why the GEP-F722-HD V2 exists. It lets you plug your DJI Air Unit straight in so you can spend less time breathing lead fumes and more time crashing into trees at 80mph. It's the F7 logic your quad deserves and the user-friendly interface your lack of patience requires. If you're still using an F4, we honestly admire your commitment to the stone age.

Why You Want It

Because your current flight controller probably doesn't have a barometer, and we both know your altitude control is basically a suggestion. This V2 board features a crisp STM32F722 MCU that processes commands faster than you can regret a mid-air power loop. Plus, with a direct plug for DJI Air Units, it’s basically the "Easy Mode" of the FPV world. Even a spec-nerd lurking on Reddit couldn't find much to complain about here.

Specs

• MCU: STM32F722 (Faster than your heartbeat during a failsafe)
• IMU: ICM42688-P (SPI) (Yes, the one the cool kids use)
• Air Unit Connection: Direct plugging into DJI Air Unit (No soldering, no crying)
• Black Box: 16M onboard (To document exactly why you crashed)
• Baro: Built-in Barometer (For people who can't tell how high they are)
• USB Interface: Type-C (Because it's not 2014 anymore)
• OSD: BetaFlight OSD w/ AT7456E chip
• BEC: 5V@3A, 9V@2.5A dual BEC (Powering your gear without the sweat)
• Firmware Target: GEPRCF722
• Size: 36.85×36.85mm (30.5×30.5mm mounting - fits almost anything that isn't a toothpick)
• Input Voltage: 3-6S LiPo (Don't try 8S. Seriously.)
• UARTs: 5 (Plenty of room for your GPS, RX, and questionable life choices)
• Power Filter: Integrated LC filter (Keeping your video cleaner than your browsing history)
• Weight: 8.1g (Light enough to blame your skills, not the gear)

In the Box

• 1x GEPRC GEP-F722-HD V2 Flight Controller
• 1x Set of hardware that you’ll definitely drop on the floor and lose immediately

Compatibility

Perfectly suited for DJI Digital FPV systems, 3-6S builds, and any pilot who values their sanity. Works flawlessly with Betaflight for all your tuning obsessions.

Highlights

• F7 Processing Power: Enough overhead to run 8k/8k while you wonder why you aren't a pro yet.
• Plug & Play: DJI socket makes setup so easy even a bot could do it.
• V2 Refinements: Because the first one was good, but this one is actually finished.

Notes

The 4mm mounting holes become 3mm when you use the included silicone shock-absorbing circles. Physics is neat, isn't it?

Disclaimer

Unmanned Tech is not responsible for any unintentional landings in trees, ponds, or your neighbor's conservatory. Fly responsibly, or at least film it.

Still Here?

You're still reading? Either you're a crawler or you really love technical specs. Buy the GEP-F722-HD V2 now and upgrade your UK FPV build before we run out of stock again. #GEPRC #FPVLife #FlightController #DJIFPV #UnmannedTechUK