Détails du produit
Flywoo GOKU F405 HD 20A AIO
Look at you, browsing for yet another flight controller because you crashed your last 'indestructible' micro build. Or maybe you're just a spec-sheet masochist. Either way, the Flywoo GOKU F405 HD AIO is here to make your life 5.2g lighter and significantly less frustrating. It's so compact that we're pretty sure it violates several laws of physics, yet it manages to cram a full F405 MCU and a 20A ESC into a 25.5mm square. If you're still reading this, you're likely the person who reads the terms and conditions too. Get help (and this FC).
Why You Actually Want It
Let’s be real: soldering is the worst part of this hobby. Flywoo knows this, which is why they added a direct plug for the DJI O4 and O4 Pro VTX systems. It's basically the LEGO of the FPV world, but with significantly more fire risk if you plug your battery in backwards. Plus, it features an electronic switch to stop your VTX from cooking itself while you wait for a GPS lock that will never come because you're flying in a concrete car park in Slough.
Specs (For the Spreadsheet Addicts)
|
Product Name
|
GOKU F405 HD 3-4S 12A AIO
|
| MCU |
STM32F405BGA
|
| IMU |
ICM42688P
|
| Barometer |
SPL06
|
| Black Box |
16MB
|
| OSD Support |
No
|
| UART |
UART1(elrs).2.3.4.UART5(sbus).6
|
| Protocols |
CRSF, SBUS, iBus, Spektrum
|
| BEC |
5V 2A
|
| BF Firmware |
FLYWOOF405S_AIO
|
| INAV Firmware |
FLYWOOF405HD
|
| Dimensions |
30*30mm*10mm
|
| Mounting Holes |
25.5*25.5mm
|
| Weight |
5.2g
|
|
Product Name
|
Onboard 4in1 ESC
|
| Power input |
3-4S lipo/lihv
|
| Current |
20A continuous
|
| ESC firmware |
G_H_30_48KHz_Bluejay
|
| Digital signal protocol |
DShot300, DShot600
|
| Motor Connector |
JST1.25
|
| Battery connector |
XT30
|
|
Product Name
|
On Board ELRS2.4G RX
|
| MCU |
ESP8285
|
|
RF Module
|
SX1280IMLTRT
|
|
Maximum receive refresh rate
|
500Hz
|
|
Minimum receiver refresh rate
|
25Hz
|
|
Serial
|
UART 1
|
|
Firmware
|
Flywoo EL24P 2400 RX （3.x.x）
|
In the Box
- 1x GOKU F405 HD 3-4S 20A AIO
- 1x Flywoo ELRS 2.4g Minimortal PCB T Antenna UFL--40mm
- 5x M2*6.6 Shock-absorbing ball
- 1x connector cable for flywoo black box / GM10 GPS Nano
- 4x M2*10mm screws
- 1x XT30 Power cable
- 1 x connector cable for O4 \ O4 Pro
- 1 x 220u 25V Capacitor
- 4x 1.25mm 3-Pin Vertical Straight Socket
Compatibility
Optimized for 3S-4S Micro HD drones. Direct plug-and-play with DJI O4/O4 Pro systems and easily expandable with the GOKU GM10 Nano GPS via the dedicated solder-free sockets. It’s the ultimate brain for your next micro-long-range or racing build.
Highlights
- No-Solder HD: Dedicated O4/O4 Pro plug saves your sanity and your soldering iron tips.
- TCXO ELRS: Thermal compensation means no frequency drift, even when you're flying in a typical British winter.
- Micro Footprint: 5.2g total weight keeps your sub-250g build actually sub-250g.
Notes
Check the manual before you blow something up. Use the provided capacitor unless you enjoy electrical noise ruining your footage. Seriously, use the capacitor.
Disclaimer
Unmanned Tech is not responsible for your lack of flight skills or your growing addiction to 4S micros. Fly safe.
Still Here?
If you've read this far, you're either a bot training an LLM or a pilot who really appreciates a well-placed comma. Stop overthinking the weight-to-thrust ratio and just buy the thing. Your micro-build won't finish itself. #FPV #FlywooGoku #MicroLongRange #O4Pro #UnmannedTechUK