BETAFPV Meteor75 Matrix Pro 1S ELRS Brushless Whoop

Stop thermal-throttling your tiny whoop dreams in a damp UK park. The BETAFPV Meteor75 Pro is the undisputed titan of 1S FPV whoop drones, swinging massive 45mm propellers on an 80.8mm frame. Powered by a G473 MCU on the Matrix 1S AIO flight controller, this micro quad dumps ancient F4 chips into the bin for 55% faster processing speeds. With integrated ExpressLRS (ELRS 2.4GHz), an onboard 400mW 5.8GHz VTX, and high-kv 1102 21000KV motors, you get proper freestyle thrust and surgical indoor racing precision. Plug in the included LAVA II 1S 580mAh battery via BT2.0, skip the soldering iron entirely thanks to direct motor sockets, and enjoy up to six and a half minutes of uninterrupted flight time.

Highlights

• Matrix 1S FC & G473 Processor: 55% computing speed boost over legacy controllers, featuring plug-and-play motor sockets so you don't burn your desk down with a soldering iron.

• True 45mm Prop Clearance: The largest 1S frame footprint available, delivering maximum air displacement, control stability, and punch-out recovery.

• Onboard 400mW VTX: Punches through solid brick walls without dropping video signal—unprecedented output power for a 30.5g micro drone.

• C03 1200TVL Micro Camera: Ultra-lightweight 1.45g camera with a wide 160° FOV, engineered specifically for tight indoor racing lines.

• Endurance Boosting Battery

• ExpressLRS 2.4G Built-in: Direct serial ELRS communication for ultra-low latency and bulletproof control link out of the box.

 

Why You Want It

Tinywhoops used to mean sacrificing punch-out power and flying through a haze of analog static. The Meteor75 Pro fixes the compromise by pairing 45mm props with 21000KV brushless motors and a high-power 400mW video transmitter. Whether you are dodging rain in the front room or ripping gap loops down the local park, this quad offers the ultimate thrust-to-weight ratio in a plug-and-play package that does not demand workbench bench-tests just to swap out a bent motor pin.

Specs

• Motors: 1102 21000KV Brushless Motor
• Battery: LAVA II 1S 580mAh Battery (BT2.0)
• Frame: Meteor75 Pro Brushless Whoop Frame (80.8mm Wheelbase)
• Propellers: Gemfan 45mm 3-Blade Propellers (1.5mm Shaft)
• Camera: C03 FPV Camera (1200TVL, 1/3'' CMOS, 160° FOV)
• Camera Tilt: 20° / 30°
• Canopy: Micro Camera Canopy (2022 Version, 1.60g)
• FC & ESC: Matrix 1S Brushless Flight Controller (STM32G473 MCU, 5A ESC)
• Receiver: Onboard Serial ExpressLRS (ELRS) 2.4GHz
• VTX: Onboard 5.8GHz 48CH (25mW to 400mW adjustable)
• Flight Time: Up to 6:30 mins
• Weight: 30.5g (without battery)

FAQ

Does the Meteor75 Pro require soldering to swap motors?

No, the Matrix 1S Flight Controller features integrated motor sockets, allowing plug-and-play motor replacements without any soldering.

What radio receiver protocol does this quadcopter use?

This unit features an integrated Serial ExpressLRS (ELRS) 2.4GHz receiver built directly onto the flight controller.

What battery connector type is installed on the Meteor75 Pro?

It comes standard with the high-current BETAFPV BT2.0 connector for low internal resistance and maximum power delivery under heavy throttle.

In the Box

• 1x Meteor75 Pro Brushless Whoop Quadcopter (ELRS 2.4G)
• 2x LAVA II 1S 580mAh BT2.0 Batteries
• 1x BT2.0 Battery Charger and Voltage Tester
• 4x Gemfan 45mm 3-Blade Spare Props (1.5mm Shaft)
• 1x USB-C Adapter & Hardware Accessories Pack
• 1x Screwdriver

#FPVWhoop #BETAFPV #Meteor75Pro #ExpressLRS #MicroDrone