The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Wizard X220S FPV Racing Quadcopter

$239.85
SKU:
SKU657271
Shipping:
Calculated at Checkout

The new Wizard X220S from Eachine is the next generation on from the well-known and loved Wizard X220. Here at Unmanned Tech we're not thinking of the Wizard X220S as an 'upgrade' as such to the Wizard X220 - we're thinking of it as an entirely different beast. The Wizard X220S gives you the full whack of equipment with a BetaFlight-ready Omnibus F4 V4 flight controller, an 800TVL CCD camera and motors that put out a max thrust of 1100g! In comparison, the stock motors on the Wizard X220 output 440g at most. You can also shove a 5S battery on this quad to really explode off the ground. As a result, you really need to be an experienced FPV flyer to handle the fire-power on offer here so get practicing on those cheaper quads and simulators! 

Key Features:

  • Next generation on from the Wizard X220 from Eachine
  • MN2206 2300Kv motors that output 1100g
  • Uses high quality equipment such as the Omnibus F4 V4 FC, 800TVL CCD camera and a 72Ch switchable transmitter
  • Choose between ATF and RTF 
  • Now compatible with 5S batteries

wizard-x220s-fpv-racing-quadcopter-12.jpg

Specifications:

General:

  • Wheelbase: 220mm
  • Frame arm: 4mm light material 
  • Weight: 356g (without battery and camera mount)
  • Take-off weight: 561g
  • Package weight: 1728g
  • Uses light, composite material.
  • 4mm thickness with 15mm width frame arms - width is 5mm less than Eachine Wizard X220.
  • Frame kit with camera angle scale and 30° camera mount for Runcam3 Gopro session. 
  • Anti-vibration sponges to protect the quad in the event of a crash.

Eachine  MN2206 2300KV motor:

  • KV: 2300
  • Max thrust: 1100G
  • Length: 35MM
  • NO.OF cell: 3-5S
  • Diameter: 28MM
  • Framework: 12N14P
  • Shaft: 3MM
  • Propeller: 5 inch
  • Weight: 28g

Eachine 30A BLHELI_S  4 in 1 ESC:

  • Con. current: 30A
  • Peak current (10S): 35A
  • Input  voltage: 2-5S
  • BEC: No
  • Programming: YES
  • Firmware: blheli_s
  • Weight: 28g
  • Size: 36*36MM
  • Dshot600 compatible

Eachine 1179 800TVL CCD camera:

  • Color: purple
  • Sensor: CCD
  • Resolution(horizontal center): 800TVL
  • Shell size: 25mm*25mm
  • Weight: 11g
  • Resolution: PAL: 1980H×1080 (2MP) NTSC: 1980H×1080V (2MP)
  • Format: PAL/NTSC switchable 
  • Video output: 1.0Vp-p/75Ω
  • Automatic gain control: 0.25/0.50/0.75/1.00 adjustable, up to 55dB.
  • AWB: ON/OFF
  • Exposure mode: electron exposure
  • Electronic shutter: 1/50(1/60) - 1/100000 S
  • Gamma correction: 0.45/1.0
  • Synchronization method: internal synchronization
  • Lens: standard 2.8mm lens 
  • Working voltage: DC12V (Wide Voltage, measured that can be work in 5-13V)
  • Workig current: 70mA (low power consumption)
  • Workig temperature: -20℃--60℃
  • Humidity: 0%~98% 
  • Strong backlighting effect

5.8G 72CH 25MW 200mw 600MW switchable transmitter:

  • Video Format  : NTSC/PAL
  • Channel: 72CH
  • Operating Temperature : -10~85℃
  • Connector: SMA Female (Inner hole)
  • Antenna Connector:  RP-SMA male (Inner needle)

vtx-frequency-table.jpg

BF3.1.5 Omnibus F4 V2 flight controller:

  • Size: 35x35mm
  • Mounting hole: 30.5x30.5mm
  • Firmware: betaflight_3.1.5_OMNIBUSF4SD
  • Input voltage: 2-6S
  • SCM: STM32 F405 MCU
  • Sensor: SPI Sensor MPU6000
  • Barometer: BMP280
  • Slot: standard SD card slot 
  • BEC: 5V/3A
  • STM32 F405 MCU, Runs betaflight_3.1.5_OMNIBUSF4SD, could run faster loop time. 
  • Using F4 MCU controls OSD over SPI bus in DMA mode.
  • OSD Configation has been included in Betaflight GUI. 
  • Built-in 5V/3A BEC.
  • Built-in galvanometer.
  • With LC filter.

iRangeX iRX-i6X 2.4GHz 10CH remote control:

  • Channel: 6-10 (Default 6)
  • Model Type: Fixed-Wing/Glider/Helicopter
  • RF Range: 2.408-2.475GHz
  • RF Power: < 20dBm
  • RF Channel: 135
  • Bandwidth: 500KHz
  • 2.4GHz System: AFHDS 2A / AFDHS
  • Modulation Type: GFSK
  • Stick Resolution 4096
  • Low Voltage Warning: < 4.2V
  • DSC port: PS/2 Port PPM
  • Chargeable: No
  • Antenna Length: 26mm (Dual Antenna)
  • Weight: 392g
  • Power: 6V DC 1.5AA*4
  • Display: STNTransflective Display, LCD 128x64 Lattice, VA 73x39mm, LCD with white backlight
  • Size: 174x89x190mm
  • On-line Update: Yes
  • Color: Black
  • Certificate: CE0678, FCC ID: N4ZFLYSKYI6X

iRangeX iR-A8S receiver:

  • Channels: PPM 8CH
  • Model type: Multi-rotor
  • Frequency range: 2.408-2.475GHz
  • Band width: 500KHz
  • Band number: 135
  • RX Sensitivity: -92 dBm
  • 2.4GHz system: AFHDS 2A
  • Modulation type: GFSK
  • DSC port: PPM
  • Transfer method: FHSS
  • Data output: 1.5mm*3 Pin  PPM
  • Antenna length: 26mm (Not including brass contacts)
  • Input power supply: 4.0-8.4V
  • Display method: LED
  • No ground interference ( Transmitting and receiving 1 m from the ground): >300m
  • Working current: 40mA
  • Each channel data: depend on the transmitter
  • Channel delay: <15mS
  • Size: 20*14*5.3mm
  • Weight: 1.2g
  • Certificate: CE0678, FCCID: N45ZA8S00

1500mAH 4S 14.8V 75C battery:

  • Capacity(mAh) : 1500
  • Cells (s): 4
  • Weight (g): 177
  • Length(mm): 80
  • Width(mm): 30
  • Height(mm): 33
  • Connector: XT60

Eachine 5051 3-blade propeller:

  • Color: purple
  • Quantity: 10 Pairs
  • Mounting Hole: 5mm

Package Includes:

RTF Version:

  • 1 x Eachine Wizard X220S frame kit
  • 1 x iRangeX iRX-i6X remote control
  • 1 x iRangeX iR-A8S receiver
  • 2 x 2206 2300KV motor CW 
  • 2 x 2206 2300KV motor CCW
  • 1 x Eachine 30A BLHELI_S  4 in 1 ESC
  • 1 x BF3.1.5 Omnibus F4 V2 flight controller
  • 1 x 800TVL camera 
  • 1 x 5.8G 72CH 25MW 200mw 600MW switchable VTX
  • 10 x Eachine 5051 3-blade propeller purple CW
  • 10 x Eachine 5051 3-blade propeller purple CCW
  • 1 x 1500mAH 4S 14.8V 75C battery
  • 1 x 30° Camera Mount(For Runcam3/Gopro session)
  • 1 x 4s Lipo charger
  • 1 x Pagoda antenna
  • 2 x Battery strap
  • 2 x Wrench
  • Note: Runcam 3 camera NOT included

ATF Version:

  • 1 x Eachine Wizard X220S frame kit
  • 2 x 2206 2300KV motor CW 
  • 2 x 2206 2300KV motor CCW
  • 1 x Eachine 30A BLHELI_S  4 in 1 ESC
  • 1 x BF3.1.5 Omnibus F4 V2 flight controller
  • 1 x 800TVL camera 
  • 1 x 5.8G 72CH 25MW 200mw 600MW switchable VTX
  • 10 x Eachine 5051 3-blade propeller purple CW
  • 10 x Eachine 5051 3-blade propeller purple CCW
  • 1 x 30° Camera Mount(For Runcam3/Gopro session)
  • 1 x Pagoda antenna
  • 2 x Battery strap
  • 2 x Wrench
  • Note: Runcam 3 camera NOT included

-->  -->