This is the Pixhawk flight controller but not as you know it! All the features (plus extras!) of the original Pixhawk but all now packed into a tiny 35x35mm package! This flight controller is therefore compatible with the latest version of Arducopter and supports all of the same GPS, OSD and power modules (although the connectors are slightly different).
One of the great features of the PixRacer is that it has the option to have WiFi built-in via a ESP8266 Wifi module that plugs onto the board (ESP8266 module sold separately). This means you can flash new firmware, setup your system and enable in-flight telemetry without the need for a desktop system.
Note: The PixRacer is designed to use a separate avionics power supply. This is necessary to avoid current surges from motors or ESCs to flow back to the flight controller and disturb its delicate sensors. We therefore recommend that you use the high voltage power module with this product. This listing is for the bare-bones Pixracer system, you will still need to add your own SD card, USB cable, GPS module, power module and any other peripherals/connectors you want to use with this board. We sell all of the required parts at our shop should you want to order everything together at once.
Invensense ICM-20608 Accel / Gyro (4 KHz)
Invensense MPU9250 Accel / Gyro / Mag (4 KHz)
Honeywell HMC5983 magnetometer with temperature compensation
Measurement Specialties MS5611 barometer
JST GH connectors
Futaba S.BUS and S.BUS2 / Spektrum DSM2 and DSMX / Graupner SUMD / PPM input / Yuneec ST24
FrSky telemetry port
OneShot PWM out (configurable)
- Option to have integrated Wifi telemetry and boot loading through ESP8266 module (sold separately)
- R12 version
- Manufactured in Germany
- Size: 35x35mm
- Mount holes: 30x30mm
- Weight: 11.8g (FC+Multifunction Module)
- 1 x PX4 PixRacer
- 1 x Cable harness