The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

PX4 PixRacer Autopilot (Basic and Combo Kit)

Calculated at Checkout

This is the Pixhawk flight controller but not as you know it! All the features (plus extras!) of the original Pixhawk but all now packed into a tiny 35x35mm package! This flight controller is therefore compatible with the latest version of Arducopter and supports all of the same GPS, OSD and power modules (although the connectors are slightly different). 

One of the great features of the PixRacer is that it has the option to have WiFi built-in via a ESP8266 Wifi module that plugs onto the board (ESP8266 module sold separately). This means you can flash new firmware, setup your system and enable in-flight telemetry without the need for a desktop system. 

You can choose between purchasing the basic PixRacer kit, and the combo kit. The combo kit includes the WiFi module, a power module, an SD card and a cover case for the board and more. Full details on what is included in both kits is shown below.

Note: The PixRacer is designed to use a separate avionics power supply. This is necessary to avoid current surges from motors or ESCs to flow back to the flight controller and disturb its delicate sensors. We therefore recommend that you use the high voltage power module with this product.  This listing is for the bare-bones Pixracer system, you will still need to add your own SD card, USB cable, GPS module, power module and any other peripherals/connectors you want to use with this board.  We sell all of the required parts at our shop should you want to order everything together at once.


  • Invensense ICM-20608 Accel / Gyro (4 KHz)
  • Invensense MPU9250 Accel / Gyro / Mag (4 KHz)
  • Honeywell HMC5983 magnetometer with temperature compensation
  • Measurement Specialties MS5611 barometer
  • JST GH connectors
  • MicroSD
  • Futaba S.BUS and S.BUS2 / Spektrum DSM2 and DSMX / Graupner SUMD / PPM input / Yuneec ST24
  • FrSky telemetry port
  • OneShot PWM out (configurable)
  • Option to have integrated Wifi telemetry and boot loading through ESP8266 module (sold separately)
  • R12 version
  • Manufactured in Germany
  • Choose between Basic Pack and the Combo Pack


  • Size: 35x35mm
  • Mount holes: 30x30mm
  • Weight: 11.8g (FC+Multifunction Module)

Package Includes:

Basic Pack:

  • 1 x PX4 PixRacer
  • 1 x Cable harness

Combo Pack:

  • 1 x PX4 PixRacer
  • 1 x CNC flight control case
  • 1 x Serial
  • 1 x i2C connect wire
  • 1 x Receiver RC_IN connect wire
  • 1 x WiFi ESP 8266 wireless module
  • 1 x MicroSD card + Reader





-->  -->