{"product_id":"pinoyfpv-ultra-2-5w-5-8ghz-fpv-vtx","title":"VTX-096 Ultra 2500 4.9G-5.8G 64CH VTX","description":"\u003ch1\u003eUMT \u003cspan\u003eVTX-096 Ultra 2500 4.9G-5.8G 64CH VTX\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003cp\u003eBecause burning standard 800mW video transmitters through tree lines gets old fast, the Ultra 2.5W 5.8GHz FPV VTX exists. Blasting up to 2500mW output power across 64 channels (including 4.9GHz bands), this high-power analog video transmitter keeps your analog video signal locked in when long-range FPV freestyle demands pure brute force. Built with an integrated microphone, wide 2-8S voltage input, and full IRC Tramp telemetry control, it is engineered for quadcopters that actually leave the flying field. We have spent ten years fixing burnt-out builds—just paste your Betaflight VTX table and stop flying into static.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2500mW Max Output:\u003c\/strong\u003e Blasts through foliage and interference with switchable pit mode up to 2.5W.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e64 Channel Support:\u003c\/strong\u003e Ultra-wide band coverage spanning 4.9GHz up to 5.8GHz frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-8S Direct Input:\u003c\/strong\u003e Accepts DC 7-36V directly from your main flight battery without external BECs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIRC Tramp Protocol:\u003c\/strong\u003e Adjust channels, bands, and power levels seamlessly via your OSD or transmitter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Want It\u003c\/h3\u003e\n\u003cp\u003eIf you enjoy losing video feed behind a single oak tree, buy something else. The Ultra 2.5W VTX is designed for long-range pilots and freestyle abusers who demand uncompromising signal penetration. Featuring standard 30.5x30.5mm mounting, an MMCX connector that will not rip off during hard impacts, and an onboard 5V BEC to cleanly power your camera, it eliminates power brownouts while maintaining clean signal delivery.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Ultra2500 2.5W VTX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Voltage:\u003c\/strong\u003e DC 7-36V (2-8S Battery)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Power:\u003c\/strong\u003e 25mW \/ 400mW \/ 800mW \/ 1500mW \/ 2500mW \/ Pit mode\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Bands:\u003c\/strong\u003e 4.9GHz - 5.8GHz (64 Channels)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtocol:\u003c\/strong\u003e IRC Tramp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna Connector:\u003c\/strong\u003e MMCX connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Connector:\u003c\/strong\u003e GH1.25-6P connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera Output:\u003c\/strong\u003e 5V @ 600mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo Format:\u003c\/strong\u003e PAL \/ NTSC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Impedance:\u003c\/strong\u003e 75Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrophone:\u003c\/strong\u003e Built-in microphone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 36.5mm x 36.5mm x 12mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Pattern:\u003c\/strong\u003e 30.5mm x 30.5mm (M3)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 15g (without cable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.1kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eHow do I set up this VTX in Betaflight?\u003c\/h4\u003e\n\u003cp\u003eFor Betaflight 4.1.0 and above, you must load the Ultra2500 VTX Table JSON file into the Betaflight Configurator VTX tab to enable IRC Tramp control via your remote control or OSD.\u003c\/p\u003e\n\u003ch4\u003eWhat antenna connector does this unit use?\u003c\/h4\u003e\n\u003cp\u003eIt utilizes a robust, board-mounted MMCX connector. Make sure to attach your MMCX antenna or pigtail before powering up to prevent damage.\u003c\/p\u003e\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x Ultra 2.5W 5.8GHz VTX\u003c\/li\u003e\n\u003cli\u003e1x GH1.25 6-Pin Wiring Cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e#FPV #FPVVTX #LongRangeFPV #PinoyFPV #UnmannedTech\u003c\/p\u003e","brand":"Unmanned Tech","offers":[{"title":"Default Title","offer_id":58597855658365,"sku":"VTX-096","price":21.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/Ultra2500w.webp?v=1787927017","url":"https:\/\/www.unmannedtechshop.co.uk\/products\/pinoyfpv-ultra-2-5w-5-8ghz-fpv-vtx","provider":"Unmanned Tech","version":"1.0","type":"link"}