{"product_id":"micoair743v2-aio-35a-h743-flight-controller-bluejay","title":"MicoAir743v2-AIO-35A H743 AIO Flight Controller with 35A Bluejay ESC","description":"\u003ch1\u003eMicoAir743v2-AIO-35A: H743 flight control and Bluejay ESCs\u003c\/h1\u003e\n\u003cp\u003eWant an H743 flight controller without finding room for a separate ESC board? The MicoAir743v2-AIO-35A puts the controller and four 35A Bluejay ESC channels on one 36 × 36mm board. Its 25.5 × 25.5mm mounting pattern, dual IMUs and microSD slot give compact builds room for more than just the essentials.\u003c\/p\u003e\n\u003ch3\u003eKey Highlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne board instead of a stack:\u003c\/strong\u003e Integrated four-channel ESC hardware reduces the number of boards you need to mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH743 processing:\u003c\/strong\u003e The STM32H743 runs at 480MHz with 2MB flash, alongside BMI088 and BMI270 IMUs and an SPL06 barometer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoom for peripherals:\u003c\/strong\u003e Seven UARTs and an I2C interface provide connections for your receiver, GPS and external sensors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluejay motor control:\u003c\/strong\u003e Four 35A continuous ESC channels support DShot300\/600. That current rating requires good cooling, not wishful thinking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate accessory supplies:\u003c\/strong\u003e Onboard 5V\/2A and 12V\/2A BEC outputs serve peripherals with the matching voltage requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Want It\u003c\/h3\u003e\n\u003cp\u003eThis AIO suits a build where board space matters but you still want connections for GPS, telemetry and other peripherals. MicoAir documents support for ArduPilot, PX4, Skybrush, INAV and Betaflight; choose and configure the appropriate firmware for your aircraft rather than treating the board as ready to fly out of the packet. The microSD slot gives you somewhere to put flight logs, while USB-C keeps the bench connection familiar. There is no onboard compass, so a build that needs one must use a suitable external I2C compass.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e MicoAir743v2-AIO-35A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessor:\u003c\/strong\u003e STM32H743, 480MHz, 2MB flash\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIMUs:\u003c\/strong\u003e BMI088 + BMI270\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarometer:\u003c\/strong\u003e SPL06\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 2–6S LiPo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated ESC:\u003c\/strong\u003e Four channels, 35A continuous per channel with good cooling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESC firmware:\u003c\/strong\u003e Bluejay; manufacturer specification lists version 0.19.2 and 48kHz PWM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESC protocols:\u003c\/strong\u003e DShot300 and DShot600; bidirectional DShot support depends on flight firmware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e Seven UARTs, I2C, SWD, USB-C, beeper and LED-strip connections\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLogging:\u003c\/strong\u003e MicroSD\/TF card slot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring:\u003c\/strong\u003e Battery voltage and current\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBEC outputs:\u003c\/strong\u003e 5V\/2A and 12V\/2A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital VTX connection:\u003c\/strong\u003e SH1.0 six-pin connector; pin 1 supplies 12V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e 25.5 × 25.5mm, 3mm holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoard dimensions:\u003c\/strong\u003e 36 × 36 × 8mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoard weight:\u003c\/strong\u003e 10g, as specified by MicoAir\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eDoes it have a built-in compass?\u003c\/h4\u003e\n\u003cp\u003eNo. MicoAir documents an external compass connection over I2C.\u003c\/p\u003e\n\u003ch4\u003eCan I use bidirectional DShot with every firmware?\u003c\/h4\u003e\n\u003cp\u003eNo. The ESC hardware supports it, but MicoAir's current documentation says PX4 and INAV do not support the board's bidirectional DShot function. Check the relevant firmware documentation before configuring it.\u003c\/p\u003e\n\u003ch4\u003eCan I plug a 5V peripheral into the digital VTX connector?\u003c\/h4\u003e\n\u003cp\u003eNot into its power pin. Pin 1 supplies 12V. Check the full pinout and the peripheral's input requirements before connecting anything.\u003c\/p\u003e\n\u003ch2\u003eDisclaimer\u003c\/h2\u003e\n\u003cp\u003eCheck motor current demand, battery voltage, mounting clearance and wiring against the manufacturer documentation before installation. Provide adequate ESC cooling and remove propellers during bench setup. A matching connector shape is not a voltage check.\u003c\/p\u003e\n\u003ch2\u003eStill Here?\u003c\/h2\u003e\n\u003cp\u003eIf your build needs H743 flight control and four Bluejay ESC channels in one mounting position, check the dimensions and pinout, then give the soldering iron something useful to do.\u003c\/p\u003e\n","brand":"MicoAir","offers":[{"title":"Default Title","offer_id":58961476583805,"sku":"MicoAir743v2-AIO-35A","price":61.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/MicoAir743v2-AIO-35A_1.webp?v=1792757651","url":"https:\/\/www.unmannedtechshop.co.uk\/products\/micoair743v2-aio-35a-h743-flight-controller-bluejay","provider":"Unmanned Tech","version":"1.0","type":"link"}