{"product_id":"matek-canpdb-3a-2s-16s-power-distribution-board-with-5-3v-bec-5-port-jst-gh-can-hub","title":"Matek CANPDB-3A 2S-16S Power Distribution Board with 5.3V BEC \u0026 5-Port JST-GH CAN Hub","description":"\u003ch1\u003eMatek CANPDB-3A: The 70V Power Bar Your Drone Is Begging For\u003c\/h1\u003e\n\u003cp\u003eListen, we know your wiring looks like a spaghetti factory exploded. You’ve got sensors, GPS modules, and peripherals all screaming for a stable CAN connection and power, but you’re running a massive 16S rig that would melt a standard PDB into a puddle of sadness. Enter the Matek CANPDB-3A, a glorified, high-voltage power bar for people who actually care about their cable management (or at least pretend to for the ‘gram).\u003c\/p\u003e\n\u003ch3\u003eWhy You Want It\u003c\/h3\u003e\n\u003cp\u003eMost PDBs give up the ghost the moment you show them anything north of 6S. This absolute unit laughs at 70V. Whether you are building a professional heavy-lifter or a long-range rig that requires more sensors than a NASA lunar lander, this board acts as both a 5.3V voltage regulator and a 5-port CAN bus splitter. It’s the traffic controller your high-voltage build deserves, ensuring your peripherals get the juice they need without the magic smoke you definitely don't.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Input Range:\u003c\/strong\u003e 6V to 70V (2S to 16S Li-xx) — basically, it handles more voltage than your local substation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Output:\u003c\/strong\u003e 5.3V on “5V” pins\/pads (Stable enough to keep your flight controller from panicking).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Load Current:\u003c\/strong\u003e 3A across all pins (Enough to power your sensors and a small ego).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReverse Polarity Protection:\u003c\/strong\u003e ABSOLUTELY NONE. Plug it in backwards, and you’ve just bought a very small, very expensive smoke machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort-circuit Tolerance:\u003c\/strong\u003e 2 seconds (Tick-tock, don't mess up).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCAN Ports:\u003c\/strong\u003e 5x CAN-H\/CAN-L in parallel (JST-GH 4pin - BM04B-GHS-TBT).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize \u0026amp; Weight:\u003c\/strong\u003e 36 x 21 x 6mm at 6.5g (Lighter than your sense of regret).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/CANPDB-3A_-_Body_Image_01.jpg?v=1782729255\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x Matek CANPDB-3A Board\u003c\/li\u003e\n\u003cli\u003eA newfound sense of electrical superiority.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eDesigned for any flight controller system utilizing CAN bus architecture (ArduPilot, PX4) and high-voltage power systems ranging from 2S up to a terrifying 16S.\u003c\/p\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Voltage Hero:\u003c\/strong\u003e Supports up to 70V input for those \"I want to hover for an hour\" builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCAN Expansion:\u003c\/strong\u003e Turns one CAN port into five, because daisy-chaining is for people with too much free time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatek Quality:\u003c\/strong\u003e It’s blue, it’s sleek, and it actually does what the manual says (novel, right?).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003ePlease note that the 5.3V output is specifically tuned to compensate for voltage drops across wiring to ensure your peripherals receive a clean 5V at the end of the line. Do not exceed the 3A total current limit unless you want to test the thermal limits of the universe.\u003c\/p\u003e\n\u003ch2\u003eDisclaimer\u003c\/h2\u003e\n\u003cp\u003eUnmanned Tech is not responsible for the spontaneous combustion of your hardware if you ignore the reverse polarity warning. Wire it right, fly it high.\u003c\/p\u003e\n\u003ch2\u003eStill Here?\u003c\/h2\u003e\n\u003cp\u003eLook at you, reading every single word instead of just looking at the pictures. You’re clearly the type of person who reads the terms and conditions. We like that. Stop procrastinating on your build and add this Matek CANPDB-3A to your cart so you can finally finish that 16S beast. Your drones deserve better than a rats-nest of wires. Buy it now and join the elite tier of FPV builders who don't rely on luck.\u003c\/p\u003e\n\u003cp\u003e#MatekSystems #CANBusHub #FPVUK #DroneElectronics #16SFPV\u003c\/p\u003e","brand":"Matek Systems","offers":[{"title":"Default Title","offer_id":58331178008957,"sku":"M-CANPDB-3A","price":15.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/CANPDB-3A-Image01.jpg?v=1782729256","url":"https:\/\/www.unmannedtechshop.co.uk\/products\/matek-canpdb-3a-2s-16s-power-distribution-board-with-5-3v-bec-5-port-jst-gh-can-hub","provider":"Unmanned Tech","version":"1.0","type":"link"}