Not the cheapest?

Let us know, we will try to beat it!

Coupons PRICE MATCH

⚠️Check Before Soldering

If you need to solder or make any modifications to your item please test the item first. Modification or problematic soldering can cause damage not covered under warranty.

Share This Item:

Zeez F7 3030 Betaflight Flight Controller V3

£49.95 (ex VAT £41.63)

Only 2 left in stock

Works well together

Zeez 55A 4in1 3030 ESC V3

Are you ready to take your drone to the next level? The ZEEZ 55A 3030 V3 is the ultimate upgrade. With more clearance and beefed-up copper around the solder pads, assembly is a breeze. Plus, with a continuous and peak draw of 55A-75A, you'll be flying circles around the competition. Just don't forget to invite them to your victory party.

SKU: 0EC-FDD-096 Category: Brand:

Don’t settle for an average flight controller that’ll leave you feeling bored and unfulfilled. Upgrade to the ZEEZ F7 V3 3030 Flight Controller and feel the power of its 8 motor outputs, on-board regulators, and top-of-the-line hardware. Warning: may cause uncontrollable laughter and an overwhelming sense of superiority.

Please note MicroSD card not included

Zeez F7 3030 Betaflight Flight Controller V3

£49.95 (ex VAT £41.63)

Only 2 left in stock

Works well together

Zeez 55A 4in1 3030 ESC V3

Are you ready to take your drone to the next level? The ZEEZ 55A 3030 V3 is the ultimate upgrade. With more clearance and beefed-up copper around the solder pads, assembly is a breeze. Plus, with a continuous and peak draw of 55A-75A, you'll be flying circles around the competition. Just don't forget to invite them to your victory party.

Don’t settle for an average flight controller that’ll leave you feeling bored and unfulfilled. Upgrade to the ZEEZ F7 V3 3030 Flight Controller and feel the power of its 8 motor outputs, on-board regulators, and top-of-the-line hardware. Warning: may cause uncontrollable laughter and an overwhelming sense of superiority.

Please note MicroSD card not included

Not the cheapest?

We will try to beat it!

⚠️Always test your item before soldering, issues caused by soldering aren't covered by warranty.

SKU: 0EC-FDD-096 Category: Brand:

Introducing the ZEEZ F7 V3 3030 Flight Controller – the ultimate powerhouse for all your aerial escapades. DJI HD System Ready with 8 motor outputs, it boasts an on-board 9V@3A regulator to power the DJI Air Unit and a 5V@3A regulator to keep all your peripherals running like a dream.

Featuring a powerful F7 processor, ICM42688P gyro, and BMP388 barometer, this flight controller takes your drone to new heights with the cleanest data and top-of-the-line hardware. Plus, with spaces and pads for TBS Crossfire and TBS Unify Nano32, you can achieve a clean, low-profile assembly that’ll make all the other drones green with envy.

Building an X8 has never been easier thanks to the added connector for a 2nd ESC, and with 5 UARTS available, an I2C port, and SD card for Blackbox data record, you’ll have all the tools you need to dominate the skies.

Key product highlights:

  • DJI HD System Ready with 8 motor outputs for the ultimate aerial experience
  • On-board 9V@3A regulator to power the DJI Air Unit and 5V@3A regulator for all your peripherals
  • Powerful F7 processor, ICM42688P gyro, and BMP388 barometer for the cleanest data and top-of-the-line hardware
  • Spaces and pads for TBS Crossfire and TBS Unify Nano32 for a clean, low-profile assembly
  • Connector for a 2nd ESC for easy X8 builds, 5 UARTS available, an I2C port, and SD card for Blackbox data record – everything you need to dominate the skies!

Features

  • Mounting holes: 30.5×30.5mm
  • LiPo Power input: 3S-6S
  • 8 Motor output
  • BEC 5V-3A / 9V-3A
  • STM32F722 MCU (216MHz max frequency)
  • ICM42688P Gyro/ACC
  • BMP388 Barometer
  • OSD chip Onboard
  • 5 available UARTs / I2C bus
  • SD Card Reader
  • HD Plug for DJI Air Unit or Caddx Vista or Walksnail VTX
  • USB Type C connector
  • Direct solder connection and board space for TBS Nano RX and TBS Unify Pro32 Nano providing the ultimate in clean stack installation

Zeez fc 3030 v3 1 Zeez fc 3030 v3 5

Included

  • 1x Zeez F7 V3 3030 Flight Controller
  • 1x Connector Cable Pack

Please note MicroSD card not included

Weight 70 g
Dimensions 5.5 × 5.5 × 2 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Share this item on:

Product Meta Information:

SKU: 0EC-FDD-096 Category: Brand:

Introducing the ZEEZ F7 V3 3030 Flight Controller – the ultimate powerhouse for all your aerial escapades. DJI HD System Ready with 8 motor outputs, it boasts an on-board 9V@3A regulator to power the DJI Air Unit and a 5V@3A regulator to keep all your peripherals running like a dream.

Featuring a powerful F7 processor, ICM42688P gyro, and BMP388 barometer, this flight controller takes your drone to new heights with the cleanest data and top-of-the-line hardware. Plus, with spaces and pads for TBS Crossfire and TBS Unify Nano32, you can achieve a clean, low-profile assembly that’ll make all the other drones green with envy.

Building an X8 has never been easier thanks to the added connector for a 2nd ESC, and with 5 UARTS available, an I2C port, and SD card for Blackbox data record, you’ll have all the tools you need to dominate the skies.

Key product highlights:

  • DJI HD System Ready with 8 motor outputs for the ultimate aerial experience
  • On-board 9V@3A regulator to power the DJI Air Unit and 5V@3A regulator for all your peripherals
  • Powerful F7 processor, ICM42688P gyro, and BMP388 barometer for the cleanest data and top-of-the-line hardware
  • Spaces and pads for TBS Crossfire and TBS Unify Nano32 for a clean, low-profile assembly
  • Connector for a 2nd ESC for easy X8 builds, 5 UARTS available, an I2C port, and SD card for Blackbox data record – everything you need to dominate the skies!

Features

  • Mounting holes: 30.5×30.5mm
  • LiPo Power input: 3S-6S
  • 8 Motor output
  • BEC 5V-3A / 9V-3A
  • STM32F722 MCU (216MHz max frequency)
  • ICM42688P Gyro/ACC
  • BMP388 Barometer
  • OSD chip Onboard
  • 5 available UARTs / I2C bus
  • SD Card Reader
  • HD Plug for DJI Air Unit or Caddx Vista or Walksnail VTX
  • USB Type C connector
  • Direct solder connection and board space for TBS Nano RX and TBS Unify Pro32 Nano providing the ultimate in clean stack installation

Zeez fc 3030 v3 1 Zeez fc 3030 v3 5

Included

  • 1x Zeez F7 V3 3030 Flight Controller
  • 1x Connector Cable Pack

Please note MicroSD card not included

Weight 70 g
Dimensions 5.5 × 5.5 × 2 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Zeez F7 3030 Betaflight Flight Controller V3

Only 2 left in stock

Works well together

Zeez 55A 4in1 3030 ESC V3

Are you ready to take your drone to the next level? The ZEEZ 55A 3030 V3 is the ultimate upgrade. With more clearance and beefed-up copper around the solder pads, assembly is a breeze. Plus, with a continuous and peak draw of 55A-75A, you'll be flying circles around the competition. Just don't forget to invite them to your victory party.