Not the cheapest?

Let us know, we will try to beat it!

Coupons PRICE MATCH

⚠️Check Before Soldering

If you need to solder or make any modifications to your item please test the item first. Modification or problematic soldering can cause damage not covered under warranty.

Share This Item:

TrueRC “X” ANTENNAS SET FOR DJI FPV

£89.95 (ex VAT £74.96)

Only 1 left in stock

SKU: 6C3-B0D-90B Category: Tags: , , Brand:

The “X” antennas set is a cross-polarized antennas kit meant to be used with DJI fpv goggles and airunit. This cross-polarized arrangement offer a more reliable  link, maximize bit rate and minimize latency in cluttered environments, like indoor or between buildings.

TrueRC “X” ANTENNAS SET FOR DJI FPV

£89.95 (ex VAT £74.96)

Only 1 left in stock

The “X” antennas set is a cross-polarized antennas kit meant to be used with DJI fpv goggles and airunit. This cross-polarized arrangement offer a more reliable  link, maximize bit rate and minimize latency in cluttered environments, like indoor or between buildings.

Not the cheapest?

We will try to beat it!

⚠️Always test your item before soldering, issues caused by soldering aren't covered by warranty.

SKU: 6C3-B0D-90B Category: Tags: , , Brand:

Installation

Place the X-AIRs on the goggles following a X pattern:

  • Bottom left: LHCP
  • Top left: RHCP
  • Top right: LHCP
  • Bottom right: RHCP

Specifications

  • Gain (X-AIR): 9.5-10.5 dBic
  • Gain (OCP): 1.6 dBic
  • Polarization: RHCP and LHCP
  • Beam-width* (X-AIR): 120deg
  • Beam-width @-3dB** (X-AIR): 68deg.

*Coverage where reception is at least equivalent to an omni.
**Coverage where at least 70% of the max range is obtained.

Includes

  • 2x RHCP X-air 5.8 MK.II
  • 2X LHCP X-air 5.8 MK.II
  • 4X 45deg low-loss RP-SMA adapters
  • 1x RHCP OCP with MMCX90 connector
  • 1x LHCP OCP with MMCX90 connector

Useful print!

If you dont have a printer, we can print one for you using our 3D print service

FAQ

Can I use something other than the OCP with MMCX90 connector on the airunit?

-“Yes, if you have pigtails you can use antennas with SMA. Leave a comment while ordering and we can swap for the connector type you need.”

Can I use this with the vista unit?

-“Yes, however the performances wouldn’t be as good as they could be with an airunit.”

Weight 100 g
Dimensions 15 × 5 × 5 cm
Polarisation

,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Share this item on:

Product Meta Information:

SKU: 6C3-B0D-90B Category: Tags: , , Brand:

Installation

Place the X-AIRs on the goggles following a X pattern:

  • Bottom left: LHCP
  • Top left: RHCP
  • Top right: LHCP
  • Bottom right: RHCP

Specifications

  • Gain (X-AIR): 9.5-10.5 dBic
  • Gain (OCP): 1.6 dBic
  • Polarization: RHCP and LHCP
  • Beam-width* (X-AIR): 120deg
  • Beam-width @-3dB** (X-AIR): 68deg.

*Coverage where reception is at least equivalent to an omni.
**Coverage where at least 70% of the max range is obtained.

Includes

  • 2x RHCP X-air 5.8 MK.II
  • 2X LHCP X-air 5.8 MK.II
  • 4X 45deg low-loss RP-SMA adapters
  • 1x RHCP OCP with MMCX90 connector
  • 1x LHCP OCP with MMCX90 connector

Useful print!

If you dont have a printer, we can print one for you using our 3D print service

FAQ

Can I use something other than the OCP with MMCX90 connector on the airunit?

-“Yes, if you have pigtails you can use antennas with SMA. Leave a comment while ordering and we can swap for the connector type you need.”

Can I use this with the vista unit?

-“Yes, however the performances wouldn’t be as good as they could be with an airunit.”

Weight 100 g
Dimensions 15 × 5 × 5 cm
Polarisation

,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

TrueRC “X” ANTENNAS SET FOR DJI FPV

Only 1 left in stock