Transtec F411 HD Flight Controller

This is a 20×20 flight controller designed to be used with the DJI HD FPV system.  It is the flight controller used on the TransTec Beetle quadcopters.  Since it is designed for digital it does not have an OSD chip which helps keep the costs down.  This is the new version 2 that makes some significant improvements like making it much easier to use with external receivers.

Specifications

• MCU : STM32F411
• IMU : MPU6000 Low noise with power filter
• Anti-Vibration silicone grommets built in
• 2x Uarts(1,2,4,5) with built-in SBUS inversion
• 4x Dshot/Proshot/Oneshot outputs(Support Bidshot)
• 1x JST-SH 1.0_8pin connector (G/Vbat/S1/S2/S3/S4/Current/R4) for Dji Vtx
• 1x GH_1.25_6pin connector for DJI HD Vtx
• WS2812 Led Strip support(5V output)
• Third party receiver solder pad
• Input : 6~20V (2~4S LiPo)
• BEC : 5V 2A cont. (Max.3A)
• LDO 3.3V : Max.200mA
• USB Type-C connector

Included

• 1x TransTEC F411 HD
• 5x Soft mount rubber
• 2x 6pin JST-SH 1.0 connector

F411 HD Pinout