TheFPV Build It Kit – 3 Inch Toothpick (Analogue / ELRS)

Ah, the Unmanned Tech Build It DIY 3 inch toothpick kit – for when you want to feel like a dental hygienist with a pilot’s license!

The Pocket-Sized Powerhouse

Ever dreamed of piloting a hummingbird on steroids? Well, dream no more! Our 3-inch toothpick kit is here to turn your backyard into a miniature Top Gun set (minus the cheesy 80s soundtrack).

Frame: TuneRC 3″ Carbon Fibre Micro ToothPick Frame – Because nothing says “I’m a serious pilot” like flying something that weighs less than your morning coffee.

Canopy: BetaFPV Micro Canopy Lite – It’s like a helmet for your drone, but without the uncomfortable chin strap.

AIO: TUNERC – Poly F405 2S-4S 20A AIO V1.2 – The brain of the operation, with more processing power than the computer that landed Apollo 11 on the moon (probably).

Motors: HappyModel EX12025 (6400KV) – These little beasts will have your drone zipping around faster than your excuses when someone asks why you need another drone.

Props: HQ T3X2.5X3 – Because every tiny titan needs its own set of deadly ninja stars.

Eyes in the Skies

Camera: Caddx Ant Lite 4:3 1200TVL Nano FPV Camera – For when you want to see the world through the eyes of an insect, minus the compound vision.

VTx: Happymodel OVX306 OpenVTX 5.8GHz Nano Video Transmitter – Transmitting your aerial shenanigans in glorious analog-o-vision!

Receiver: Happymodel EP1 RX 2.4GHz ExpressLRS (ELRS) – Because losing signal is only fun when you’re dodging your ex’s phone calls.

Power to the People

This kit does not include a battery, so we suggest a 2S Lava 450mAh battery – just enough juice to give your neighbors a good show before you have to land and explain why their cat is now hiding under the porch.Remember, this kit is perfect for those who want to experience the thrill of building their own drone without the hassle of compatibility nightmares. It’s like LEGO for adults, but with a higher chance of property damage!So, whether you’re looking to upgrade from paper airplanes or just want to add another whizzing menace to your fleet, the Unmanned Tech Build It DIY 3 inch toothpick kit is your ticket to micro-sized mayhem. Just don’t blame us when you start seeing the world in FPV!

What you get

This is our 3 inch toothpick (analogue/ ELRS) kit. The parts list is as follows:

• Frame: TuneRC 3″ Carbon Fibre Micro ToothPick Frame
• Canopy (injection moulded plastic): BetaFPV Micro Canopy Lite
• AIO: TUNERC – Poly F405 2S-4S 20A AIO V1.2
• Motors: HappyModel – EX12025-motor (6400KV)
• Prop: HQ T3X2.5X3
• Camera: Caddx Ant Lite 4:3 1200TVL Nano FPV Camera
• VTx:  Happymodel OVX306 OpenVTX 5.8GHz Nano Video Transmitter
• Receiver: Happymodel EP1 RX 2.4GHz ExpressLRS (ELRS)
• You can also use this parts list a guide if you want to tweak this kit for your own liking, such as swapping the frame for another 3″ toothpick frame that we sell, or swapping the camera for another nano size camera as an example.

Extra Parts

If you don’t already have the rest, we recommend the following to get started:

• Battery: Lava 2S 450mAh 75
• Charger: SkyRC e680 1-6S Charger (Single Channel) OR SkyRC D100 Neo 2-6S Charger (Dual Channel)
• Charger Adapter: Charger Adapter Cable
• Radio: Radiomaster Pocket (ELRS, NOT CC2500) OR Radiomaster Zorro (ELRS, NOT 4-in-1)
• Goggles: EV800D OR Emax Transporter II OR BetaFPV VR03

Suggested Tools

If you don’t have any tools, this is what we suggest:

• UMT FPV Drone Tool Kit with Case (10pc) OR TheFPV 18pc Drone Tool Kit
• Sequre SQ-001 65W Portable Soldering Iron Kit  OR UMT 80W Soldering Iron Kit with M900 Compatible Tips
• DroneBuildr Zip Tie / Cable Tie (Pack Of 20)
• DroneBuildr Wire Mesh Paracord Cable Sleeve (for your motor wires)
• Vifly ShortSaver 2 Smart Smoke Stopper
• DroneBuildr 100pcs 10cm Heat Shrink Tube Kit

Note: Accessory pack contents may vary based on supply availability.