TeenyF4 Pro Flytower F4 1-2S, 5A, 16x16mm
£24.95 (ex VAT £20.79)
This is a super tiny yet cable 16x16mm F4 flight stack, complete with betaflight OSD, Dshot600 5A ESC. Supports 1-2S lIpo.
Out of stock
Item discontinued
Want to be notified when this product is back in stock?
This is a super tiny yet cable 16x16mm F4 flight stack. The flight controller includes the MPU6000 IMU, built in betaflight OSD, and a buck boost regulator. The ESC supports a continous current of 5A with bursts to 7A, and runs BLheli_S firmware. So in short if you are looking for a powerful yet tiny flight stack for your micro quadcopter, the TeenyF4 Pro is what you need.
Key Features
- Support programmable LED_strip
- Support BLheli/BLHELI_S suite Pass-through ready
- Support PPM, Oneshot125,Oneshot42,Multishot, Dshot150, Dshot300, Dshot600
- Default Dshot600
- Built-in voltage detection, alarm
- Built-in Betaflight-OSD
- Buzzer solder pin
- LED_STRIP connector
Specification
Flight Controller:
- Item name: TeenyF4 Pro flight controller board
- Model: TeenyF4 Pro
- Processor: STM32F405RGT6
- Sensor: MPU-6000 ( connected by SPI)
- Firmware Version: betaflight_3.2.0_OMNIBUSF4SD
- Built-in betaflgiht OSD
- Built-in Buck-Boost Converter
- Input Voltage: 1-2S Lipo
- Receiver: PPM, IBUS, SBUS, DSM2, DSMX etc.
- Size: 20*20mm
- Mounting hole: 16*16mm
- Mount Hole Diameter: 2mm ( M2 )
- Weight: 2.2g
- Application: for Micro FPV brushless drone
5A 4 in 1 ESC: ( Bottom )
- Item Name: Teenypro 4 In 1 5A BLHeli_S ESC
- Mode: Teenypro
- Input Voltage: 1-2S Lipo
- Con. Current: 5A
- Peak Current: 7A (5 Seconds)
- Firmware: BLHELI_S
- Processor: SILABS EFM8BB21F16G
- BEC: NO
- Size: 23x27mm (includes solder pad)
- Mounting Holes: 16x16mm (M2)
- Weight: 2.1g
- Firmware Target: BLHeli_S S_H_50_REV16_7
- Support Dshot150 Dshot300 Dshot600 Oneshot125 Multishot PWM
Setting up your RX
- SBUS/IBUS/DSMX receiver please configure RX1 (UART1) as input, and enable Serial_RX
- PPM receiver don’t need to enable Serial_RX
- DSM/DSM2/DSMX receiver power from 3.3V
- SBUS and PPM receiver power from 5V
Included:
- 1x F4 Flight Controller Board
- 1x 5A 4 In 1 ESC
- 1x 6P Cable
- 8x M2*5+5 Nylon column
- 8x M2 Nuts
- 8x M2 Screw
| Weight | 50 g |
|---|
Only logged in customers who have purchased this product may leave a review.
Delivery Information
- Free UK Delivery for orders over £100 The free shipping method uses Royal Mail’s RM48 service, batteries are excluded.
- Same Day Dispatch For orders placed before 3PM (UK Time) Mon-Fri Excluding Bank Holidays
- Need something Urgently? Select RM special delivery during checkout to have your order delivered next working day guaranteed (assuming you order before 15:00 when we are open)
Returns Information
- 30 Day Return Period If you change your mind you have up to 30 days to return something. Must be returned in as new condition
- 180 Day Warranty For items with a manufacturer defect or an issue resulting from damage during delivery to you. Consumable items such as batteries are excluded.
Related products
Flight Stacks/Towers
Flight Stacks/Towers
Flight Stacks/Towers
Flight Stacks/Towers
Flight Stacks/Towers
Flight Stacks/Towers
Flight Stacks/Towers
Flight Stacks/Towers
