Not the cheapest?

Let us know, we will try to beat it!

Coupons PRICE MATCH

⚠️Check Before Soldering

If you need to solder or make any modifications to your item please test the item first. Modification or problematic soldering can cause damage not covered under warranty.

Share This Item:

TBS Unify Pro 5G8 V3 Video Transmitter (SMA)

(2 customer reviews)

£39.90 (ex VAT £33.25)

Out of stock
Restock in 2+ Weeks

Want to be notified when this product is back in stock?

SKU: 044-652-78F Category: Brand:

TBS Unify Pro 5G8 V3 Video Transmitter (SMA)

£39.90 (ex VAT £33.25)

Out of stock
Restock in 2+ Weeks

Want to be notified when this product is back in stock?

Not the cheapest?

We will try to beat it!

⚠️Always test your item before soldering, issues caused by soldering aren't covered by warranty.

SKU: 044-652-78F Category: Brand:

This is the Unify Pro V3 Video Transmitter from Team Black Sheep. This is the video transmitter just for racers. It weighs in at just 5g and has an adjustable output power of 25-800mW. It has a super clean transmission and it is race-ready with PitMode. It runs off a filtered 5V power supply and comes with a SMA (female socket) connector.

New for V3

  • Improved Voltage spikes acceptance from 6.5Vmax. on V2 to 13Vmax. on V3

Key Features:

  • Smallest, lightest video transmitter on the market
  • Up to 800mW of output power
  • Ultra-clean transmission (up to 16 pilots at once!)
  • PitMode – power up your quad during a race
  • Easy OSD, FC and RC channel changes, with fallback button menu
  • Robust RF amplifier allows powering up without antenna for hours!
  • Clean powerup and video switching
  • CE certified

PitMode – Ready to Race

Ever fancied zero interference? Well now it is possible, even while your racer is powered up! If you’ve ever repaired a quad during a race, you’ll know the frustrations of not being able to power on and test your system. With PitMode, we have reduced the output power to a bare minimum (way below single digit mW’s), and move to frequencies unused by race organizers, to allow you to power up your quad and still see the image! You’ve got a few meters of range to put your quad through its paces before placing it on that starting grid and, in combination with CleanSwitch, you can power on as soon as your channel is available without interrupting any of the active channels.

Smartaudio V2 – Full Control

SmartAudio technology provides UART and I2C control for your entire video transmitter. Parameters such as output power, bands, channels and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. TBS CORE PRO). With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit … jump between channels without interfering fellow pilots in the air, create backup-/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility!

Cleanswitch – Neighbour Friendly

CleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly … that’s how we like it at TBS 🙂

Say No to Dipswitches!

Even though learning binary was a fun mind-game, in practice a single-push-button or OSD-controlled video transmitter is just much easier to operate. Gone are the days of video transmitter cards, stepping on people’s channels by mistake, or a mismatch between your goggle and video transmitter frequencies.

Specifications:

  • Operating Voltage: 4.5 – 5.5V
  • Supply current: 600mA
  • Operating Temperature: watch for normal airflow
  • Audio carrier Frequency: 6.5 MHz
  • Video Input Impedance: 75 Ohm
  • Weight: 5g (with SMA, without antenna)
  • Antenna Connector: SMA Female Socket with screw mounting holes
  • Video Format: NTSC/PAL
  • Output Power: 13dBm (25mW), 23dBm (200mW), 27dBm (500mW), 29dBm (800mW*)

Includes:

  • HAM license is required for operation on HAM channels, and HAM power levels! The VTx ships with only legal channels enabled, please consult the manual on unlocking procedure.
Weight 11 g

2 reviews for TBS Unify Pro 5G8 V3 Video Transmitter (SMA)

  1. Roland Willis

    You can have the best motors, esc, frame etc but if you have a poor video feed you are not going to enjoy flying it. This is a compact vtx with great output and very reliable. Smart Audio makes changing channels via goggles and tx a piece of cake. It is quite expensive but this is one component you really don’t want to compromise on. Highly recommended.

  2. Kamil

    This is my second vtx, first was hv and both are very good quality and range. Price is not cheap but definetly wort money.

Only logged in customers who have purchased this product may leave a review.

Share this item on:

Product Meta Information:

SKU: 044-652-78F Category: Brand:

This is the Unify Pro V3 Video Transmitter from Team Black Sheep. This is the video transmitter just for racers. It weighs in at just 5g and has an adjustable output power of 25-800mW. It has a super clean transmission and it is race-ready with PitMode. It runs off a filtered 5V power supply and comes with a SMA (female socket) connector.

New for V3

  • Improved Voltage spikes acceptance from 6.5Vmax. on V2 to 13Vmax. on V3

Key Features:

  • Smallest, lightest video transmitter on the market
  • Up to 800mW of output power
  • Ultra-clean transmission (up to 16 pilots at once!)
  • PitMode – power up your quad during a race
  • Easy OSD, FC and RC channel changes, with fallback button menu
  • Robust RF amplifier allows powering up without antenna for hours!
  • Clean powerup and video switching
  • CE certified

PitMode – Ready to Race

Ever fancied zero interference? Well now it is possible, even while your racer is powered up! If you’ve ever repaired a quad during a race, you’ll know the frustrations of not being able to power on and test your system. With PitMode, we have reduced the output power to a bare minimum (way below single digit mW’s), and move to frequencies unused by race organizers, to allow you to power up your quad and still see the image! You’ve got a few meters of range to put your quad through its paces before placing it on that starting grid and, in combination with CleanSwitch, you can power on as soon as your channel is available without interrupting any of the active channels.

Smartaudio V2 – Full Control

SmartAudio technology provides UART and I2C control for your entire video transmitter. Parameters such as output power, bands, channels and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. TBS CORE PRO). With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit … jump between channels without interfering fellow pilots in the air, create backup-/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility!

Cleanswitch – Neighbour Friendly

CleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly … that’s how we like it at TBS 🙂

Say No to Dipswitches!

Even though learning binary was a fun mind-game, in practice a single-push-button or OSD-controlled video transmitter is just much easier to operate. Gone are the days of video transmitter cards, stepping on people’s channels by mistake, or a mismatch between your goggle and video transmitter frequencies.

Specifications:

  • Operating Voltage: 4.5 – 5.5V
  • Supply current: 600mA
  • Operating Temperature: watch for normal airflow
  • Audio carrier Frequency: 6.5 MHz
  • Video Input Impedance: 75 Ohm
  • Weight: 5g (with SMA, without antenna)
  • Antenna Connector: SMA Female Socket with screw mounting holes
  • Video Format: NTSC/PAL
  • Output Power: 13dBm (25mW), 23dBm (200mW), 27dBm (500mW), 29dBm (800mW*)

Includes:

  • HAM license is required for operation on HAM channels, and HAM power levels! The VTx ships with only legal channels enabled, please consult the manual on unlocking procedure.
Weight 11 g

2 reviews for TBS Unify Pro 5G8 V3 Video Transmitter (SMA)

  1. Roland Willis

    You can have the best motors, esc, frame etc but if you have a poor video feed you are not going to enjoy flying it. This is a compact vtx with great output and very reliable. Smart Audio makes changing channels via goggles and tx a piece of cake. It is quite expensive but this is one component you really don’t want to compromise on. Highly recommended.

  2. Kamil

    This is my second vtx, first was hv and both are very good quality and range. Price is not cheap but definetly wort money.

Only logged in customers who have purchased this product may leave a review.

TBS Unify Pro 5G8 V3 Video Transmitter (SMA)
TBS Unify Pro 5G8 V3 Video Transmitter (SMA)

Out of stock
Restock in 2+ Weeks