Sub250 Oasisfly30 ELRS 3 Inch HD Freestyle Quadcopter (w/o DJI O3)

Sub250 Oasisfly30 ELRS 3-Inch HD Freestyle FPV Drone (Without O3)

Description:

Meet the Sub250 Oasisfly30: a compact, sub-250g freestyle quadcopter built for high-definition acrobatics—minus the O3 price tag. Whether you’re carving lines in a tight bando or just want to yeet around your local park, this little beast is ready to shred.

Despite its tiny frame, the Oasisfly30 doesn’t pull punches. With a durable carbon frame, 1404/4500KV motors, and a Redfox A3 AIO flight controller, you get punchy power and tight control without adding bulk. ELRS support ensures low-latency control, and the wide compatibility means you can run your preferred receiver setup.

This is an analog setup, so if you’re dreaming of DJI O3/ O4 Lite, look elsewhere. But if raw freestyle flow and under-250g legality is your jam? You’re in for a good time.

Key Features:

• 3-Inch Frame: Agile and lightweight, perfect for freestyle.

• Sub250g Build: Fly legally in more regions without registration.

• Robust Carbon Construction: 2.5mm bottom, arms, and upper plate for crash resilience.

• Redfox A3 45A AIO FC: STM32F722RET6 MCU, ICM42688-P gyro, and AT7456E OSD for clean performance.

• Powerful Motors: SUB250 1404/4500KV motors paired with HQProp T3x3x3 props.

• Receiver Options: Available in PNP, ELRS 2.4G, and TBS NanoRX variants.

• VTX and Camera: Not included—bring your own (Analog, DJI O3, or DJI O4 Lite with 3d printed camera adaptor).

Specifications:

• Frame: Oasisfly30

• Wheelbase: 150mm

• Roof Thickness: 2mm

• Bottom & Arm Plates: 2.5mm

• Flight Controller: Sub250 Redfox A3 45A AIO

• MCU: STM32F722RET6

• Gyro: ICM42688-P

• OSD: AT7456E

• ESC: Integrated 45A

• Motors: SUB250 1404/4500KV

• Props: HQProp T333 (Black)

• Receiver Options: PNP / ELRS 2.4G / TBS NanoRX

• Battery Recommendation: 4S 530–730mAh LiPo (not included)

• Connector: XT30

What’s in the Box:

• 1x Oasisfly30 Freestyle Drone (No O3 setup)

• 1x M15*150mm Battery Strap

• 1x Spare Screw Pack

• 1x L-shaped 1.5mm Screwdriver

• 1x HQ Prop T333 (Black)

• 1x USB-C Adapter Cable for AIO

• 1x Sub250 Accessory Stickers

• 1x Sub250 Kit Stickers

• 1x Lens Silicone Pad

• 1x Mint Green Antenna Print

• 1x Analog Camera Lens 3D Print

• 1x Bare GoPro Mount Bracket

Disclaimer: Accessories may vary based on supply.