Not the cheapest?

Let us know, we will try to beat it!

Coupons PRICE MATCH

⚠️Check Before Soldering

If you need to solder or make any modifications to your item please test the item first. Modification or problematic soldering can cause damage not covered under warranty.

Share This Item:

Spedix IS30 30A 4in1 ESC BLheli_S Dshot600 (30x30mm)

£32.28 (ex VAT £26.90)

Out of stock
Restock in 2+ Weeks

Want to be notified when this product is back in stock?

SKU: SPX-71032 Category: Brand:

The IS30 uses larger 5x6mm MOSFETS to increase performance and reliability over other ESC’s making this one of the best 30A 4in1 ESC around.

Spedix IS30 30A 4in1 ESC BLheli_S Dshot600 (30x30mm)

£32.28 (ex VAT £26.90)

Out of stock
Restock in 2+ Weeks

Want to be notified when this product is back in stock?

The IS30 uses larger 5x6mm MOSFETS to increase performance and reliability over other ESC’s making this one of the best 30A 4in1 ESC around.

Not the cheapest?

We will try to beat it!

⚠️Always test your item before soldering, issues caused by soldering aren't covered by warranty.

SKU: SPX-71032 Category: Brand:

The Spedix IS30 sets a new standard for 4in1 ESCs. Many ESCs used in FPV racing quads are equipped with 3.3×3.3mm MOSFETs. Chips of this dimension are typically lower in efficiency and reliability. With the same overall dimensions, the carefully designed IS series of high performance ESCs uses 6 larger 5x6mm sized MOSFETs to meet the increasing demand for current from the power systems used in FPV racing. These MOSFETs are manufactured with more mature technologies, larger heat dissipating areas and lower resistance. All of this adds up to improved reliability compared to ESCs with smaller MOSFETs. Furthermore, other factors such as better design, fast EFM8BB21 MCU, independent half bridge drive chip, and 3 Oz copper PCB with high TG, all make the IS30 one of the best in the market.

Features

  • Standard 30.5mm spaced mounting holes
  • The dimensions of the board (except the soldering pads) are 36x36mm, the same as a standard flight controller.
  • The extended soldering pads can be easily soldered in place without disassembling your machine
  • Efficient switching 5V/1.2A BEC output.
  • Uses a more reliable 1.25mm pitch 7 pin Molex connector containing 4 ESC signals, 5V supply and VBAT
  • Additionally there are three set of solder pads. One 5V output, and two at battery voltage level that can be used for video transmitters, accessories or the optional electrolytic capacitor (included)
  • 6.1mm diameter clearance around mounting holes (clearance for spacers without hitting components is a common problem among 4in1 ESCs)

Specifications

  • Size: 36mm x 36mm x 5mm
  • Mounting Holes: 30.5mm x 30.5mm
  • Weight: 10.3 grams (no wires)
  • 30Amp/40Amp Burst
  • 2-4S
  • EFM8BB21 MCU
  • 3 oz copper PCB
  • 5x6mm MOSFETs
  • BLHeli_S firmware
  • Supports Oneshot125, Oneshot42, Multishot, DSHOT600

Includes

  • IS30 4in1 ESC
  • 16 AWG power wires
  • 7 pin connector to bare wires
  • 7 pin connector with servo leads (1x3pin w/BEC, rest single connectors)
  • 25V 330µF Rubycon ZLH electrolytic capacitor, can be used for further voltage spike suppression (general purpose cap, not low ESR)

Is30a-esc. Jpg

Weight 30 g

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Share this item on:

Product Meta Information:

SKU: SPX-71032 Category: Brand:

The Spedix IS30 sets a new standard for 4in1 ESCs. Many ESCs used in FPV racing quads are equipped with 3.3×3.3mm MOSFETs. Chips of this dimension are typically lower in efficiency and reliability. With the same overall dimensions, the carefully designed IS series of high performance ESCs uses 6 larger 5x6mm sized MOSFETs to meet the increasing demand for current from the power systems used in FPV racing. These MOSFETs are manufactured with more mature technologies, larger heat dissipating areas and lower resistance. All of this adds up to improved reliability compared to ESCs with smaller MOSFETs. Furthermore, other factors such as better design, fast EFM8BB21 MCU, independent half bridge drive chip, and 3 Oz copper PCB with high TG, all make the IS30 one of the best in the market.

Features

  • Standard 30.5mm spaced mounting holes
  • The dimensions of the board (except the soldering pads) are 36x36mm, the same as a standard flight controller.
  • The extended soldering pads can be easily soldered in place without disassembling your machine
  • Efficient switching 5V/1.2A BEC output.
  • Uses a more reliable 1.25mm pitch 7 pin Molex connector containing 4 ESC signals, 5V supply and VBAT
  • Additionally there are three set of solder pads. One 5V output, and two at battery voltage level that can be used for video transmitters, accessories or the optional electrolytic capacitor (included)
  • 6.1mm diameter clearance around mounting holes (clearance for spacers without hitting components is a common problem among 4in1 ESCs)

Specifications

  • Size: 36mm x 36mm x 5mm
  • Mounting Holes: 30.5mm x 30.5mm
  • Weight: 10.3 grams (no wires)
  • 30Amp/40Amp Burst
  • 2-4S
  • EFM8BB21 MCU
  • 3 oz copper PCB
  • 5x6mm MOSFETs
  • BLHeli_S firmware
  • Supports Oneshot125, Oneshot42, Multishot, DSHOT600

Includes

  • IS30 4in1 ESC
  • 16 AWG power wires
  • 7 pin connector to bare wires
  • 7 pin connector with servo leads (1x3pin w/BEC, rest single connectors)
  • 25V 330µF Rubycon ZLH electrolytic capacitor, can be used for further voltage spike suppression (general purpose cap, not low ESR)

Is30a-esc. Jpg

Weight 30 g

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Spedix IS 30A 4in1 ESC BLheli_S Dshot600
Spedix IS30 30A 4in1 ESC BLheli_S Dshot600 (30x30mm)

Out of stock
Restock in 2+ Weeks