SkyStars F7 HD Pro 2 + KM50 Flight Stack
£77.95 (ex VAT £64.96)
The SkyStars Fly Tower Stack features an F722 HD Pro3 Flight Controller and a KM50 Pro 50A 3-6S 4-in-1 BLHeli_32 ESC with a 30×30 mounting pattern.
Out of stock
Restock in 2+ Weeks
Want to be notified when this product is back in stock?
Features
1. Solder pads are the largest in size compared to other FC in market.
2. Proper solder pad spacing to avoid solder bridge and facilitate easy soldering.
3. ESC connector on top-side rather than bottom which makes it easy for repair.
4. Support ELRS receiver row pin straight mounting.
5. TVS Diode for Reverse Polarity Protection and Voltage Spike Suppression.
6. Powerful BEC to supply all your electronics.
7. Pads arrangement are executed in such a way that when you twist the wires of the camera VTX and RX you don’t get any wire overlapping this gives you a uniform twist and clean look.
8. DJI connector on the top side.
9. Budget-friendly price ( We understand the situation of chip shortage and rising prices of FC )
10. Two stages of Quality check to reduce any faulty electronic.
11. No power lines near Gyro to avoid any EMI interference.
12. Comes ready with I2C support and INAV.
Specifications
Flight Controller
-
MCU: STM32F722RGT6 216MHz
-
Gyroscope: BMI270
-
Baro:Bmp280
-
OSD: Betaflight SPI OSD DJI HD OSD(UART6)
-
Black box: 16MB
-
6x Uarts: UART 1/2/3/4/5/6
-
4x PWM outputs
-
1x I2C
-
3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
-
USB Type-C(USB2.0)
-
1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)
-
1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V)
-
VTX 10V/Vbat filtered power ON/OFF switch
-
DJI FPV OSD is supported by any spare UART
-
LED: 4 LED independent pads, support WS2812 programming lamp output.
-
Receiver: Support Sbus, crsf, ibus, SBUS, XBUS, support 3.3v Spektrum satellite receiver, The default receiver input is UART1(You can solder ELRS RX on UART1), F7 has a built-in inverter, which can be installed in any spare UART.
Power
- Input voltage: 3-6S
- BEC: 5V/10V 3A max dual-channel BEC supports stable power supply on the sky side of DJI
- LDO 3.3V: Max.250mA
FC Firmware
- BetaFlight firmware: SKYSTARSF722Pro
- INAV firmware: SKYSTARSF722HD
Mounting
- Installation size: 30.5mm × 30.5mm The installation hole is M4 and supports shock column installation
- External size 39mm × 39mm
- Flight control weight: 6.9g
- Flight control onboard voltage sensor.
KM50 PRO 50A ESC
- Mounting Hole Pattern : 30.5mm / M3
- Input voltage : 3-6S LiPo / LiHV
- ESC Protocol : Dshot 600/1200
- Product size : 41x46x7.6mm
- Overcurrent Protection : Yes
- Peak Current : 60A (10S)
- Continous Current : 50A
- Firmware : Blheli_32
- Weight : 17g
- BEC : NO
Includes
-
1x F7HD Pro3 FC
-
1x KM50 128K BL32 4IN1 ESC
-
Connector Cables
| Weight | 50 g |
|---|---|
| Dimensions | 5 × 5 × 5 cm |
1 review for SkyStars F7 HD Pro 2 + KM50 Flight Stack
Only logged in customers who have purchased this product may leave a review.
Delivery Information
- Free UK Delivery for orders over £100 The free shipping method uses Royal Mail’s RM48 service, batteries are excluded.
- Same Day Dispatch For orders placed before 3PM (UK Time) Mon-Fri Excluding Bank Holidays
- Need something Urgently? Select RM special delivery during checkout to have your order delivered next working day guaranteed (assuming you order before 15:00 when we are open)
Returns Information
- 30 Day Return Period If you change your mind you have up to 30 days to return something. Must be returned in as new condition
- 180 Day Warranty For items with a manufacturer defect or an issue resulting from damage during delivery to you. Consumable items such as batteries are excluded.
Related products
Out of stock
£29.95 (ex VAT £24.96)
Out of stock
£34.99 (ex VAT £29.16)
Out of stock
BetaFlight
£27.99 (ex VAT £23.33)
Out of stock
BetaFlight
£29.89 (ex VAT £24.91)
Out of stock
£31.99 (ex VAT £26.66)
Out of stock
BetaFlight
£43.92 (ex VAT £36.60)
Out of stock
BetaFlight
£38.45 (ex VAT £32.04)
Out of stock
£8.99 (ex VAT £7.49)
haydenr.ste (verified owner) –
Will leave a proper review once fitted but love the size of the pads and board layout.