Not the cheapest?

Let us know, we will try to beat it!

Coupons PRICE MATCH

⚠️Check Before Soldering

If you need to solder or make any modifications to your item please test the item first. Modification or problematic soldering can cause damage not covered under warranty.

Share This Item:

Sipeed USB-JTAG/TTL RISC-V Debugger (ST-Link V2 STM8/STM32 Simulator)

£6.95 (ex VAT £5.79)

Out of stock
Item discontinued

Want to be notified when this product is back in stock?

SKU: 72F-C3B-30A Categories: , Tag: Brand:

This debugger is used with the Sipeed K210 RISC-V AI chip.   Simple 4-wire interface (including power), fast, stable; interface definition housing directly marked.

Sipeed USB-JTAG/TTL RISC-V Debugger (ST-Link V2 STM8/STM32 Simulator)

£6.95 (ex VAT £5.79)

Out of stock
Item discontinued

Want to be notified when this product is back in stock?

This debugger is used with the Sipeed K210 RISC-V AI chip.   Simple 4-wire interface (including power), fast, stable; interface definition housing directly marked.

Not the cheapest?

We will try to beat it!

⚠️Always test your item before soldering, issues caused by soldering aren't covered by warranty.

SKU: 72F-C3B-30A Categories: , Tag: Brand:

Support the full range of STM32 SWD debugging interface, a simple 4-wire interface (including power), fast, stable; interface definition housing directly marked! No need to read the manual

Support the full range of STM8 SWIM download debugging (common development environments such as IAR, STVD etc. are supported); supported software versions as follows:

– ST-LINK Utility 2.0 and 4.2.1 above
– STVD and above
– STVP 3.2.3 and above
– IAR EWARM V6.20 and above
– IAR EWSTM8 V1.30 and above
– KEIL RVMDK V4.21 and above

Support for automatic firmware upgrades to ensure follow-up support ST products. The factory firmware has been upgraded to the latest V2.J17.S4;

Increase the 5V power output, the output I / O ports are protected afraid of operational errors caused by ST-LINK V2 damage!

The interface easy to use copper gilded horns seat pitch of 2.54, with 20CM DuPont line, the line can respond to different target sequence, flexible wiring;

The use of U disk aluminum housing protects the motherboard, easy to carry, is not afraid of static electricity, afraid to fall throw touch.

 

Weight 30 g

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Share this item on:

Product Meta Information:

SKU: 72F-C3B-30A Categories: , Tag: Brand:

Support the full range of STM32 SWD debugging interface, a simple 4-wire interface (including power), fast, stable; interface definition housing directly marked! No need to read the manual

Support the full range of STM8 SWIM download debugging (common development environments such as IAR, STVD etc. are supported); supported software versions as follows:

– ST-LINK Utility 2.0 and 4.2.1 above
– STVD and above
– STVP 3.2.3 and above
– IAR EWARM V6.20 and above
– IAR EWSTM8 V1.30 and above
– KEIL RVMDK V4.21 and above

Support for automatic firmware upgrades to ensure follow-up support ST products. The factory firmware has been upgraded to the latest V2.J17.S4;

Increase the 5V power output, the output I / O ports are protected afraid of operational errors caused by ST-LINK V2 damage!

The interface easy to use copper gilded horns seat pitch of 2.54, with 20CM DuPont line, the line can respond to different target sequence, flexible wiring;

The use of U disk aluminum housing protects the motherboard, easy to carry, is not afraid of static electricity, afraid to fall throw touch.

 

Weight 30 g

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Sipeed USB-JTAG/TTL RISC-V Debugger (ST-Link V2 STM8/STM32 Simulator)

Out of stock
Item discontinued