SPLIT 4 4K High Definition Recording / Low Latency FPV 2 IN 1
4K 30FPS 2.7K 60 FPS & FPV Camera / Low latency (average 55MS) / Wide voltage (5-20V)
FPV aspect ratio 16:9/4:3 switchable / Power-off protection for video files / UART control
Easy Installation
Lens module size (14*14mm)
Hole Distance of PCB Installation (25.5*25.5mm)
4K
1080p
SONY 13MP Pixel SENSOR
Being able to record 4K footage is better than 1080p, but until now we needed to use dual camera systems such as the Runcam Hybrid, or Tarsier 4k which adds extra weight and makes mounting the FPV camera more challenging. Well at last you can have a 4K capable system that is no bigger than theRuncam split we have all come to love. Just a single main board and a single 14x14mm FPV camera.
Key Features
- 4K 30FPS 2.7K 60 FPS & FPV Camera
- SONY 13MP Pixel SENSOR
- Entire system just 10.2g
- Lower working current of 450mA at 5V
- Low latency AV out (average 55MS)
- Wide voltage support (5-20V)
- FPV aspect ratio 16:9/4:3 switchable
- Power-off protection for video files
- UART control
- Camera module size (14*14mm) with 19mm adaptor bracket
- Main board mounting holes is 25.5×25.5mm (whoop form factor)
Specifications
Model | Split 4 |
Image Sensor | SONY 13MP |
Field of View(FOV) | 140° |
Video Resolution | 4K@30fps/2.7K@60fps/2.7K@50fps/1080P@60fps |
Video File Format | MP4 |
TV Mode | NTSC (720*480)/PAL (720*576) Switchable |
Interface | UART |
Max Micro SD Card Supported | 128G(Recommend U3) |
Power Input | DC 5-20V (Non-direct power supply from battery,Powered direcly with battery will generate surges and burn the camera.) |
Lens Module Size | 14*14mm |
Mounting Hole Distance | 25.5*25.5mm |
PCB Size | 29*29mm |
Working Current | MAX 450mA @5V |
Weight | 10.2g |
Included
- 1x Runcam Split 3 Nano FPV Camera
- 1x 14 to 19 Bracket
- 1x 3PIN 1.25 JST Silicone Cable
- 1x Set of M2 Screws
- 1x Manual