QAV ZMR 250 Spare Arm

Carbon Fibre Spare Arm For ZMR / QAV 250 Frames (18XX / 22XX Motors)

Ah, the ZMR 250 and its many QAV-style cousins! Legends of the early FPV scene. If you’re still rocking one of these venerable 250-class frames (or perhaps reviving one from the dusty shelf of glory), you know that arms occasionally meet immovable objects. Fear not, nostalgic pilot! This Carbon Fibre Spare Arm is here to get your classic quad back in the air.

Designed as a direct replacement for standard ZMR 250 frames and many similar “QAV 250” style clones, this arm features the mounting holes suitable for common 18XX (like 1806) and 22XX (like 2204, 2205, 2206) size brushless motors that were the workhorses of that era. Made from durable carbon fiber, it’s ready to replace that snapped limb from your last unscheduled landing.

Important Compatibility Note: The term “QAV 250” was widely used for frames *similar* to the original Lumenier QAV250. This arm is designed for the common ZMR250 and its direct clones which often shared this naming. It may *not* fit the genuine Lumenier QAV250 or other less common variants. Please carefully compare the shape and mounting points to your existing frame/arms before ordering!

Keep the legacy alive and flying! Grab a spare (or two) and be ready for the next mishap.

Search Terms You Might Have Used (Blast from the past!): ZMR 250 Arm, QAV 250 Arm, FPV 250 Spare Arm, Carbon Fiber Drone Arm 250, Replacement Arm ZMR250, 1806 Motor Arm, 2204 Motor Arm, FPV Frame Arm, Quadcopter Spare Arm 250, Clone QAV Arm, 250 Class Frame Arm.

Specifications:

• Product: Spare Frame Arm
• Compatibility: ZMR 250 frames and common QAV 250 style clones (Verify design match)
• Material: Carbon Fiber (Thickness typically 3mm-4mm for this class, but may vary)
• Motor Mount Pattern: Slotted to accommodate standard M3 mounting for 18XX and 22XX motors (e.g., 16x19mm spacing and variations)
• Frame Size Class: 250

What’s In The Box:

• 1 x Carbon Fibre Spare Arm for ZMR / QAV 250 Style Frames

Disclaimer: This product includes one single arm only. Mounting hardware (screws, nuts) is NOT included and should be reused or purchased separately. Arm thickness and exact carbon weave appearance may vary slightly between batches. Crucially, re-verify compatibility with your specific frame, especially if it’s a less common “QAV 250” variant. Accessories/packaging can vary based on supply.