NewBeeDrone StingerBee HD 3inch kit with GPS – ELRS2.4G

Freedom from Regulations:

No bureaucratic shackles here—the StingerBee HD O3’s lightweight design, with a total weight of 238 grams (with a Tattu 550mAh 4S battery), ensures you soar unburdened by the CAA’s paperwork.

Cutting-Edge Flight Controller:

The InfinityAIO255 flight controller is the drone’s brain, boasting a powerful F7 MCU, a reliable 45A BLHeli32 ESC for smooth power delivery, and an MPU6000 Gyro for buttery-smooth flight.

Sophisticated Navigation:

With the NewBeeDrone M10Q GPS module, your drone will always find its way home, thanks to reliable GPS functions and failsafe measures that keep it in check.

Tuned to Perfection:

Each StingerBee HD O3 BNF drone undergoes rigorous tuning with blackbox data to deliver peak performance tailored by the experts at NewBeeDrone.

Powerful Propulsion:

The combination of 1404 4000kv motors and Gemfan3020 3-inch tri-blade propellers offers the perfect balance of power and agility for a thrilling yet smooth flight.

Professional-Grade Video:

Forget the hassle of mounting bulky external cameras—the DJI O3 camera system, expertly tuned by NewBeeDrone, ensures superior video capture for your flying escapades.

Compact and Mighty:

The StingerBee HD O3 might be small, but it’s built for adventure. It packs a punch in a size that’s easy to carry anywhere.

InfinityAIO255 Flight Controller Specifications:

• MCU: STM32F745VEH6
• Gyro: MPU6000
• Blackbox: 128MB
• Connectors: 6-Pin DJI FPV Air Unit, Micro USB
• UART Ports: UART1 (SBUS on DJI Connector), UART2 (DJI Connector), UART3 (Free), UART5 (ESC), UART7 (Free), UART8 (Free)
• ESC MCU: 4x SMT32G071 BLHELI32
• ESC Current: 45A Continuous, 55A Burst
• Battery Input: 3-6S
• Weight: 10.2g (without grommets)
• Power Supply: 5V 3A (for external LED or GPS module)
• Betaflight OSD Support: Analog build
• Mounting Holes: 25.5×25.5
• Dimensions: 37x32mm

Drone Specifications:

• Size: 3 inches
• Frame: StingerBee 3inch
• Propellers: Gemfan 3020 3-inch tri-blade
• Motors: Flow 1404 4000kv
• GPS Module: NewBeeDrone M10Q Micro GPS with Compass
• Battery: Tattu 550mAh 4S (recommended)
• Power Connector: XT30

In the Box:

• 1x StingerBee 3-inch frame
• 1x Infinity 255 AIO 45A Flight Controller
• 4x 1404 Flow Motor 4000kv
• 8x Gemfan 3020 3-inch tri-blade propellers
• 1x BeeCeiver ELRS2.4 Receiver
• 4x Motor wire protector
• 1x M10Q Micro GPS Module with Compass

Note: The DJI O3 system is not included but can be installed. Adjust Betaflight settings to configure the receiver.

3D Printed Files

3DPrint Part for StingerBee HD – Google Drive

If you dont have a 3D printer, we offer a 3D print service to print the parts for you very affordably.

Betaflight Config:

To switch to the O3 receiver, navigate to Betaflight and adjust the settings as follows:

1. Go to Betaflight and switch “Rx Serial” to Uart1.
2. Change the receiver protocol to SBUS.

Additionally, ensure that the DJI O3 protocol is configured to output normal SBUS.

The NewBeeDrone StingerBee HD 3inch kit with GPS is your ticket to thrilling aerial adventures and cinematic captures. With top-notch engineering and cutting-edge features, it’s a marvel of modern drone technology ready for any journey.