Welcome to the world of NeutronRC’s AT32F435 Mini 5in1 AIO, where size doesn’t just defy, but straight-up mocks the laws of physics. This little marvel packs a punch in a form factor that’s small enough to make you question if it’s powered by some sort of wizardry.
Regarding motor compatibility with 1S: If you are using an 11XX or larger motor, it will operate smoothly on both 1S and 2S.
For 07XX, 08XX, and 10XX motors on 1S, it is recommended to use motors from RC inpower, Emax brands, as other brands may have compatibility issues.
Using 2S is generally recommended. If you must use 1S, please proceed with caution as your specific motor may not work well.
Specifications
1. MCU: AT32F435CGU7 ,@288M Hz,1MB Flash
2. IMU: BMI270 (SPI1) CW=0,YAW = -45
3. OSD: AT7456E (SPI2)
4. Blackbox: SPI=2 Flash 16M
5. Baro: Infineon DPS310(I2C1)
6. 5xUarts(1,2,3,5,7)&1x I2C :
7. BEC: 5V 2.0A
8. FC: ATBETAFLIGHT(NEUTRONRCF435MINI)
9. Support:INAV/QUICKSILVER/Betaflight(Will 4.5)
11. Support:AM32(NEUTRON_MINIAIO_F421)
10. ESC: HF32/AM32
12. ELRS: 2.4G(EMAX 2.4GHz)
13. Current sensor (Scale 165)&Voltage sensor (Scale 110)
14. 7x LEDs for FC Status & 3.3V & 5V & ELRS&VTX(Chanl,Band,Power)
15. ESCMCU: AT32F421 120MHz (HF32 Firmware)/AM32 optional
16. AOS MOS, low internal resistance and high current
17. Current 12Ax4 ,Max 13A(5Ssec)
18. 8-layer 2OZ, 2-order blind via PCB.
Brains and Brawn: AT32F435 MCU & 12A ESCs At its heart lies the AT32F435 MCU, a chip so smart it probably does quantum physics in its spare time. This tiny titan is the brain behind the brawn, controlling four 12A ESCs (AM32) that are more than ready to take your FPV drone to new heights – both literally and figuratively.
Stay Connected: ELRS 2.4G Receiver with a Dash of TXCO Connectivity? Check. The built-in ELRS 2.4G receiver with TXCO is like having a mini telecom tower on board. It ensures your drone stays connected faster than your teenager to Wi-Fi.
Seeing Clearly: 5.8Ghz 400mW VTX And for those who like to see their flights, this AIO FC includes an integrated 400mW VTX, complete with a IPX-1 connector, making antenna changes easy.
The Extras: Current Sensor, Barometer & More With a current sensor to keep tabs on power flow, and a DPS310 barometer for those high-altitude adventures, this AIO is like having a Swiss Army knife in your drone’s toolkit.
USB & BEC – The Cherry on Top Lastly, the Micro USB port allows for easy updates and tweaks, while the 5V 2A BEC is like having a mini power station on board, ensuring your electronics stay juiced up.
In The Box:
1x NeutronRC AT32F435 Mini 5in1 AIO